Technical Data - hager LCP01U Manual

12. Technical data

General data
• Failsafe multi-frequency radio technology with a free field (1) range of up to 400 m, according
to environmental and installation conditions
• Radio link: 868 - 870 MHz, 25 mW max, Duty cycle: 0,1%, Rx: category 2
• High-fidelity digital sound
Outdoor caller unit data
• External boxes made of polycarbonate
• Controller and outdoor caller unit degree of protection: IP54/IK08
• Operating temperature from – 20°C to + 70°C
• Controller power supply: 4 LR20 type 1.5 V alkaline batteries and/or 12/24 V AC or 12/30 V DC
power supply
• 3-year battery life (with 4 LR20 batteries) (2)
• Wiring using 4 wires between the outdoor caller unit and the controller
• Control and powering of any type of low consumption (0.5 A max.) 12 V latches.
• Control of safety ELV motorisation system able to operate with a 48 V DC/1 A dry contact (relay
or switch)
• All controller inputs/outputs are SELV types
Internal handset unit data
• Interior boxes made of ABS
• Degree of protection: IP31/IK04
• Operating temperature from -5°C to +55°C
• Base powered by mains supply via 220 V/6 V transformer
• Rechargeable handset powered by MTU01X plug-in lithium-ion battery
• Rechargeable handset battery life when off base: 15 days (3)
(1) The free field range corresponds to the maximum theoretical distance separating the controller and the handset when
there are no obstacles in the way (e.g. wall, screen, vegetation, electromagnetic disturbance, etc.) likely to reduce the
range.
(2) The battery life is calculated for household use, i.e. 2 x 10-sec communications, 7 latch commands and 6 gate
commands per day.
(3) The battery life is based on household use, i.e. 2 x 10-sec communications, 2 inter-handset communications every 10
seconds and 6 commands (2 latch commands, 2 gate commands, 1 lighting command, and 1 garage door command)
per day. For the rechargeable handset battery life to last its full period (15 days) when off its base, it must be left on its
base to charge for at least 2 days when it is first powered or 4 days if the display screen disappears (during which time it
can of course be used).
Waste processing of electrical and electronic devices at the end of their service life (Applicable in
European Union countries and other European countries with a waste collection system). Used on pro-
ducts or product packaging, this symbol indicates that the product must not be thrown out with house-
hold waste. It must be taken to a waste collection point for electrical and electronic product recycling.
When you make sure that this product is disposed of in the most appropriate manner, you are helping to pro-
tect the environment and human health. If you would like additional information concerning the recycling of this
233