Testing Access Controls - hager LCP01U Manual

8.2 Testing access controls

IMPORTANT: to test the access controls, it is first necessary to register a tag or programme an access code
on the outdoor caller unit (see User guide/11.2 Modifying tag options/11.3 Modifying access code options).
Activate the outdoor
caller unit
1. Hold the tag in front of the
name label.
Mr et Mme Evêque-Mourroux
1. Or enter the access code (2)
Mr et Mme Evêque-Mourroux
2. If a latch is connected,
it will be unlocked
within 5 seconds.
or
2. If a gate alone is connected
(without a latch), side gate
access is unlocked within
5 seconds.
For additional tests (gate access, listen-in and inter-handset communication functions,
etc.), please refer to the corresponding chapters in the user manual.
The doorphone is now operational. If need be, you can customise it by following the
instructions in the chapters on Modifying outdoor caller unit operating options and
Modifying handset operating options in the user manual.
(1) If a position contact is connected.
(2) If you press the wrong button, press
Status display
on the handset (1)
or
then enter the access code again.
Latch access status
C
Closed
Open
C
C
209