Class i, division 2, groups b, c and d (class i, division 2, groups c and d with selector switch) explosion proof emergency signaling system (11 pages)
Page 2
15 amp branch circuit with a dedicated circuit breaker or fuse and should not supply power to any other device. Compliance and conformity to local codes and ordinances is the responsibility of the installer. 11/17/08 Bradley Corporation • 215-693B Rev. F; ECN 07-512A...
Page 3
Body Blue Green Brass Black Adapter and Tee 3.6" (91mm) 1-1/4" NPT Electrical Inlet and Connections Outlet IMPORTANT! Power Supply System is prewired. Installer connects ONLY ground black and white wires! Bradley Corporation • 215-693B Rev. F; ECN 07-512A 11/17/08...
Page 4
1. Connect the 24 volt AC power to the Alarm System (using the red and black wires only) in the 6- or 12-foot power cable provided. Test the alarm system. 11/17/08 Bradley Corporation • 215-693B Rev. F; ECN 07-512A...
Page 5
S19-120ABF S19-120SS E19-120SS S19-120SSBF S19-120T S19-120HFP Flow Switch optional location (recommended location for brass fl ow switch is inside of wall) To 1-1/4" Water Supply Piping supplied by installer Application S19-310PVC Bradley Corporation • 215-693B Rev. F; ECN 07-512A 11/17/08...
Page 6
7. Test the alarm as described in “Test the Alarm System.” Alarm system maintenance The Bradley Alarm System is designed to be virtually maintenance free. An occasional damp cloth wiping of the clear dust cover is all that is needed to ensure maximum visual attention-getting ability.
Need help?
Do you have a question about the S19-320B and is the answer not in the manual?
Questions and answers