TP-Link TL-WR845N Manual page 24

Chapter 4
after a specified inactivity period (Max Idle Time) and not be able to re-establish
when you attempt to access the Internet again.
Note:
• Only when you have configured the system time on the
time-based connecting function take effect.
• Sometimes the connection cannot be terminated although you have specified the
some applications are visiting the Internet continually in the background.
If you want to do some advanced configurations, please click Advanced.
• MTU Size - The default MTU size is 1480 bytes. It is not recommended that you change
the default MTU size unless required by your ISP.
• Service Name/AC Name
should not be configured unless you are sure it is necessary for your ISP. In most
cases, leaving these fields blank will work.
• ISP Specified IP Address
the router, please select
provided by your ISP in dotted-decimal notation.
• Detect Online Interval
interval. The default value is 0. You can input the value between 0 and 120. The value
0 means no detect.
• Primary DNS/Secondary DNS
addresses to the router, please select
address in dotted-decimal notation of your ISP's primary DNS server. If a secondary
DNS server address is available, enter it as well.
BigPond Cable
If your ISP provides BigPond cable connection, please select
- The service name and AC (Access Concentrator) name
- If your ISP does not automatically assign IP addresses to
Use IP address specified by ISP
- The router will detect Access Concentrator online at every
- If your ISP does not automatically assign DNS
Use the following DNS servers
System Tools > Time Settings
Max Idle Time
and enter the IP address
BigPond
page, will the
because
and enter the IP
Cable.
21