Table of Contents
Advertisement
Installation Precautions
•
Install CDR200tx on a level surface.
•
Do not install CDR200tx near water, in direct sunlight,
close to heating units, or in areas subject to high or low
temperature extremes, excessive dust, vibration, or severe
shocks.
•
Do not expose CDR200tx to extremes of humidity.
•
The ambient temperature where CDR200tx is installed
should be between 5°C and 40°C (41°F–104°F).
•
Using CDR200tx close to a television or radio may cause
interference. Install CDR200tx at least one meter away
from television and radio equipment.
•
Do not block the CDR200tx ventilation slots. Install
CDR200tx with at least 10 cm of free space all-around.
•
Make sure the CDR200tx power cord is not located in a
position where it is likely to be walked on or pinched by
other equipment.
Important Precautions
ii
Advertisement
Table of Contents
