General Paper Characteristics; Graphical User Interface Overview - Xerox 128 Operator's Manual

General paper characteristics

Graphical user interface overview

DocuTech 128/155/180 HighLight Color Operator Guide
• Predrilled paper: Has holes for use in binders or binder rings.
Before loading predrilled paper, fan it to remove any loose
plugs that could cause paper jams.
• Perforated paper: Have been pierced with one or more rows of
holes to permit easy tearing or separating into sections. Read
and follow the instructions on the ream packaging.
• Precut or full tabs
• Carbonless paper: Is paper that is treated or coated to
produce an image under pressure (without the use of carbon
paper). After opening, close and seal the original ream
wrapper to store. Do not leave in paper trays overnight. Read
and follow the instructions on the ream packaging.
When selecting paper, look for the following:
• Low moisture content (a paper to moisture ratio below 5.7
percent). Paper with higher moisture content may curl and
jam.
• Smooth surface
• Moisture resistant wrapping
• No defects such as bent edges or uneven surfaces
• Grain runs parallel with the long side of paper
The graphical user interface (GUI) on the controller enables you to
interact with the printing system. It contains windows, icons, and
menus through which you can issue commands and perform
operation and system administration tasks.
When the workstation controller is powered on and booted, the
DocuSP Print Services main menu displays on the controller
screen.
System components
2- 5