Cleaning The Q1011/1009 Sensor And Mirror; Cleaning The Q1106 And Q1166 Sensors - Xerox 128 Operator's Manual
Xerox color printer operator guide
Hide thumbs
Also See for 128:
- Planning manual (38 pages) ,
- Install manual (3 pages) ,
- Software manual (506 pages)
Table of Contents
Advertisement
Routine maintenance
Cleaning the Q1011/1009 sensor and mirror
Cleaning the Q1106 and Q1166 sensors
3- 3 6
4. Place a dry cleaning pad on the sensor and move it from left to
right to clean the sensor.
5. Lower the Area 4 green handle.
6. Close the printer doors.
1. Open the right and left doors of the printer and locate the
Q1011/1009 sensor.
Figure 3-32 Q1011/1009 sensor and mirror
2. Apply a small amount of lens and mirror cleaner to a cleaning
pad.
3. Wipe the sensor gently with the cleaning pad.
NOTE: High volume printer configuration only
To access sensors Q1106 and Q1166, open the top cover of the
high capacity stacker.
To clean the sensors:
1. Brush or wipe the sensor windows lightly.
2. Remove any dust present in the area.
DocuTech 128/155/180 HighLight Color Operator Guide
Advertisement
Table of Contents
