Tenda W302A User Manual page 28

300M Wireless AP
1. Backup: Once you have configured the device the way you want it, you can save these settings to a
configuration file on your local hard drive that can later be imported to your device in case that the device is
restored to factory default settings. To do so, click the Backup button and specify a directory to save settings
on your local hardware.
2. Restore: Click the Browse button to locate and select a configuration file that is saved previously on your
local hard drive and then click Restore to restore it. Configurations will be restored after device reboot.
Tip---------------------------------------------------------------------------------------------------------------------------------------
The default backup configuration file name is APcfgfile.cfg. It is advisable to keep the filename extension(.cfg)
unchanged.
-----------------------------------------------------------------------------------------------------------------------------------------------
Restore to Factory Default
If the device or clients connected to the device fail to access Internet due to incorrect configurations and you
cannot solve the problem, click Tools > Configuration > Restore to Factory Default to reset the device and
then reconfigure it.
To restore to factory default settings, two methods are available:
Method 1: Using UI
Click the Restore to Factory Default button and wait until the progress indicator displays 100% completed.
28