Selecting The Colour System In Av Mode; Connecting To A Dvd Player With Av1(Dvd) Video Component Output Terminal - Sanyo CA14SE1(V) Instruction Manual

Multi system catv hyper band 256 programmes with automatic tuning
Hide thumbs Also See for CA14SE1(V):
Table of Contents

Advertisement

Connecting Other Equipment
Connecting Other Equipment
When watching a video program input from the AV1 terminal, press the TV/AV button to select AV1.
Whenever the TV/AV button is pressed, the mode will change as follows:
28
TV mode
You can select a TV programme while watching a playback from a VCR
For example:
To select programme position "9" while watching a playback from external VCR, press "9" button of the
remote control. The TV set returns to the TV mode and programme "9" will be selected.
To select the programme position "26", press Digit (--/-) button, "2" then "6" button. Then TV set returns
to the TV mode and programme position "26" will be selected.
Note: Pressing either of the PROGRAMME UP or DOWN buttons of the remote control or the TV will
return the TV to the TV mode.

Selecting the Colour System in AV Mode

Depending on the type of video tape or connected AV equipment being used, it may be necessary to
select colour system. In this case, press the RECALL/COLOUR SYSTEM button and select a suitable
colour system.
Each time the RECALL/COLOUR SYSTEM button is pressed, colour system is changed as follow;
AV1
AUTO
Colour system setting for AV position is automatically stored in the memory.
Connecting to a DVD Player with AV1 (DVD) Video Component Output
Terminal (Y, Cb or Cr) (optional models)
Connect the component output terminal on
your DVD player to the component video input
terminal of this product. (NOTE: When a sig-
nal of Y,Cb,Cr/Y,Pb,Pr is received, the output
signal from monitor output terminal will be cor-
responding but without colour (black and
white image).)
To watch a program in this connection
status, select DVD.
AV1
28
(TV mode)
Make sure the component video terminal (Y, C
is connected correctly.
AV1
AV1
PAL
SECAM
AV1(DVD)
AV2
(Optional model)
AV1(DVD)
(This AV1(DVD) will be
displayed for model with
DVD Component input.)
AV1
AV1
NTSC
C
To Input Terminal C
R
To Input Terminal C
B
To Input Terminal Y
or C
)
b
r
AV2
AV1
NTSC 4.43
INPUT
MONITOR OUT
AV1/DVD
R
R
R
To Audio Input-R (AV1)
(MONO)
C
L
L
B
To Audio Input-L (AV1)
Y
V
I
D
VIDEO
E
O
Video/DVD Player
15

Advertisement

Table of Contents
loading

Table of Contents