Switching On The Appliance/ Selecting A Programme; Placing Laundry Into The Drum - Siemens WM16W79XES Instruction Manual And Installation Instructions

Switching on the appliance/
selecting a programme
Press the # button. The appliance is
switched on.
The Cottons programme set at the
factory is then always displayed.
You can use this programme or select a
different programme. The programme
selector can be turned in either
direction.
If you have activated the
Note:
childproof lock, you must deactivate it
before you can set a different
programme. ~ Page 39
The indicator light on the programme
selector lights up and the default
programme settings for the selected
programme appear in the display panel:
Temperature
■
Spin speed
■
The maximum load and the duration
■
of the programme (alternately)
Information on water and energy
■
consumption
In appliances with a drum light:
The drum is lit after switching on the
appliance, after opening and closing the
door and after starting the programme.
The light switches off automatically.
Operating the appliance

Placing laundry into the drum

:
Warning
Danger of death!
Items of laundry pretreated with
cleaning agents that contain solvents,
e.g. stain remover/cleaning solvent,
may cause an explosion after being
loaded into the washing machine.
Hand-rinse these items of laundry
thoroughly beforehand.
Notes
Mix items of laundry of varying sizes.
■
Laundry items of different sizes
distribute themselves better during
the spin cycle. Individual laundry
items may cause an unbalanced
load.
Observe the maximum specified
■
load. Overfilling adversely affects the
washing result and promotes
creasing.
Unfold presorted laundry items and
1.
place them in the drum.
Make sure that no items of laundry
2.
are trapped between the door and
the rubber seal, and close the door.
The Ü button indicator lamp flashes
and the programme settings appear in
the display panel.
en
37