Siemens WM16W570EE Instruction Manual And Installation Instructions

Siemens WM16W570EE Instruction Manual And Installation Instructions

Table of Contents

Advertisement

Quick Links

Washing machine
WM16W570EE
siemens-home.com/welcome
ens-home.com/welcome
Register
your
product
online

Advertisement

Table of Contents
loading

Summary of Contents for Siemens WM16W570EE

  • Page 1 Washing machine WM16W570EE siemens-home.com/welcome Register your product online ens-home.com/welcome...
  • Page 2 Your new washing machine Display rules : Warning! You have chosen a Siemens washing machine. This combination of symbol and signal word indicates a possibly dangerous Please take a few minutes to read and situation. Not heeding the warning can become familiar with the advantages of cause death or injuries.
  • Page 3: Table Of Contents

    Contents e n W a s h i n g m a c h i n e I n s t r u c t i o n M a n u a l a n d I n s t a l l a t i o n I n s t r u c t i o n s Intended use.
  • Page 4 Cleaning and maintenance . . . 29 Aqua-Stop warranty ..47 Machine housing/control panel ..29 Drum ......29 Descaling.
  • Page 5: Intended Use

    Intended use Intended use For private domestic use only. ■ I n t e n d e d u s e The washing machine is suitable for ■ washing machine-washable fabrics and hand-washable wool in water containing detergent. To be operated with cold mains ■...
  • Page 6: Safety Instructions

    Safety instructions Reaching into the drum Safety instructions ■ when it is turning can cause injuries to hands. Electrical safety Do not reach into the drum S a f e t y i n s t r u c t i o n s when it is turning.
  • Page 7: Safety For Children

    Safety instructions Safety for children Warning Risk of poisoning! Warning Detergents and care products Danger of death! may be poisonous if If children play with the washing consumed. machine, they may get into life- Keep detergents and care threatening situations or injure products out of the reach of themselves.
  • Page 8: Environmental Protection

    Environmental protection Information on energy and water ■ Environmental consumption: ~ Page 12 The displays provide information protection about the relative level of energy and water consumption in the selected Packaging/used appliance programmes. E n v i r o n m e n t a l p r o t e c t i o n The more indicator lights light up, Dispose of packaging in an the higher the programme's...
  • Page 9: Main Points In Brief

    Main points in brief Main points in brief M a i n p o i n t s i n b r i e f Connect the mains Open the door. To switch on, press Select a plug. Turn on the the # button.
  • Page 10: Getting To Know The Appliance

    Getting to know the appliance Getting to know the appliance Washing machine G e t t i n g t o k n o w t h e a p p l i a n c e Detergent drawer ~ Page 24 Operating/display panel Door with door handle 9S Open the door...
  • Page 11: Control Panel

    Getting to know the appliance Control panel All the buttons are sensitive Note: H Changing the default programme (except for the main switch) and only settings: ~ Page 21 need to be pressed lightly. Temperature (°C), ■ Spin speed (0), ■...
  • Page 12: Display Panel

    Getting to know the appliance Display panel Further information Anti-Stain System (ã) ð ý â ì ~ Page 22 Programme progress: Prewash Washing ¼ Rinse ¬ Spin - 0 - Programme end Default programme settings: ( Temperature in °C Programme end during Rinse Ž...
  • Page 13: Laundry

    Laundry Some examples of soiling levels can Laundry be found on ~ Page 14 – Light: Do not prewash, select the P repare the laundry speedPerfect G setting if L a u n d r y necessary Caution! – Normal Damage to the appliance/fabrics –...
  • Page 14: Detergent

    Detergent Saving energy and detergent Detergent For light and normal soiling, you can C orrect selection of detergent save energy (lower washing D e t e r g e n t temperature) and detergent. The care label is crucial for selecting the correct detergent, temperature and Saving Soiling/note...
  • Page 15: Overview Of Programmes

    Overview of programmes Overview of programmes Programmes on the programme selector O v e r v i e w o f p r o g r a m m e s Programme/type of laundry/information Settings Programme name Max. load Brief explanation of the programme and for which fabrics it is Temperature that can be selected suitable.
  • Page 16 Overview of programmes Programme/type of laundry/information Settings Max. 4 kg Mixed load of cottons and synthetic fabrics Ž - 40 °C $, 0 - 1600** rpm ecoPerfect ¦, speedPerfect G, Prewash (prelav. !), Extra Rinse (extra l), Easy-Iron (menos Ø) Delicates / Silk (delicado / seda) Max.
  • Page 17 Overview of programmes Programme/type of laundry/information Settings *** Drum Clean (limpieza tambor/limpeza tambor) 0 kg Programme for cleaning and caring for the drum and the outer 80, 90 °C tub, e.g. before running the first wash cycle, if washing frequently 1200 rpm at a low temperature (40 °C or lower) or if an odour has developed after a prolonged period of non-use.
  • Page 18 Overview of programmes Programme/type of laundry/information Settings *** Outd. / Impregnation (microfibras + impreg.) Max. 1 kg Wash cycle followed by waterproofing of membrane-coated Ž - 40 °C weatherproof and outdoor clothing or water-resistant fabrics $, 0 - 800 rpm Select a programme.
  • Page 19 Overview of programmes Programme/type of laundry/information Settings *** Curtains (cortinas) Max. 3.5 kg 3.5 kg heavy curtains or 25 - 30 m² lightweight drapes Ž - 40 °C Notes $, 0 - 800 rpm Shorter rinse and final spin cycles. ■...
  • Page 20: Starching

    Overview of programmes Programme/type of laundry/information Settings Shirt / Blusiness (camisas / business) Max. 2 kg Non-iron shirts or blouses made of cotton, linen, synthetic fibres or Ž - 60 °C blended fabrics $, 0 - 800 rpm Notes ecoPerfect ¦, speedPerfect G, Shirts/blouses are only given a short spin on the ■...
  • Page 21: Programme Default Settings

    Programme default settings The maximum speed that can be set Programme default depends on the model and programme that has been selected. settings Ready in The default programme settings are P r o g r a m m e d e f a u l t s e t t i n g s displayed in the display panel after (terminado en / em) selecting the programme.
  • Page 22: Additional Programme

    Additional programme settings After starting the programme (if a Extra Rinse Ready in time has been selected and (extra l) the wash programme has not yet started), you can change the Additional rinse cycle for particularly preselected number of hours as follows: sensitive skin and/or for areas with very Press the Ü...
  • Page 23: Operating The Appliance

    Operating the appliance Information on water and energy ■ Operating the consumption appliance In appliances with a drum light: The drum is lit after switching on the Preparing the washing appliance, after opening and closing the O p e r a t i n g t h e a p p l i a n c e machine door and after starting the programme.
  • Page 24: Measure And Add Detergent And Care Products

    Operating the appliance Measure and add detergent and care products Caution! Damage to the appliance Cleaning agents and agents for pre- treating laundry (e.g. stain removers, prewash sprays, etc.) may cause Measuring aid A for liquid detergent damage if they come into contact with Compartment II Detergent for the main the surfaces of the washing machine.
  • Page 25: Change The Programme Default Settings

    Operating the appliance Change the programme Note: Foam detection If the o symbol also lights up in the default settings display panel, the washing machine has detected too much foam during the You can use or change the default wash programme and automatically settings for this washing cycle.
  • Page 26: Adding Laundry

    Operating the appliance Adding laundry Cancel the programme After starting the programme, you can For programmes at high temperatures: add or remove laundry if necessary. Press the Ü button. To cool down laundry: Select Rinse. Press the Ü button to do this. Press the Ü...
  • Page 27: Removing Laundry/Switching Off The Appliance

    Appliance settings Removing laundry/switching Appliance settings off the appliance You can change the following settings: Open the door and remove the A p p l i a n c e s e t t i n g s The volume of the buttons and the laundry.
  • Page 28: Changing The Signal Volume

    Sensors Changing the signal volume Sensors Use the Ready in + or - button to A utomatic load sensing change the following settings at the S e n s o r s corresponding programme selector Depending on the type of fabric and positions: load, the automatic load sensing 2: The volume of the information...
  • Page 29: Cleaning And Maintenance

    Cleaning and maintenance Machine housing/control Cleaning and panel maintenance Wipe the housing and the control ■ Warning panel with a soft, damp cloth. C l e a n i n g a n d m a i n t e n a n c e Remove the detergent residue Danger of death! ■...
  • Page 30: Detergent Drawer And Housing

    Cleaning and maintenance Detergent drawer and housing The drain pump is blocked, emergency draining If the washing machine contains detergent or fabric softener residues: Warning Pull out the detergent drawer. Press Risk of scalding! down the insert and fully remove the When you wash at high temperatures, drawer.
  • Page 31: The Drain Hose At The Siphon Is Blocked

    Cleaning and maintenance Carefully unscrew the pump cover; The drain hose at the siphon residual water may leak out. is blocked Clean the interior, pump-cover thread and pump housing. The Switch off the appliance. Pull out the impeller in the drain pump must be mains plug.
  • Page 32: Filter In The Water Supply Blocked

    Faults and what to do about them. Filter in the water supply 3 Faults and what to do about them. blocked Emergency release F a u l t s a n d w h a t t o d o a b o u t t h e m . First, reduce the water pressure in the supply hose: E.g.
  • Page 33: Information On The Display Panel

    Faults and what to do about them. Information on the display panel Display Cause/Remedy - P - and Ï The door is unlocked. It is possible to add laundry. - P - The temperature is too high. Wait until the temperature drops. ■...
  • Page 34: Faults And What To Do About Them

    Faults and what to do about them. Faults and what to do about them. Faults Cause/Remedy Water is leaking from the Attach the drain hose correctly or replace it. ■ machine. Tighten the screw fitting on the supply hose. ■ The machine is not filling Have you pressed the Ü...
  • Page 35 Faults and what to do about them. Faults Cause/Remedy Odours in the washing Run the Drum Clean or Cottons 90 °C programme without laundry. machine. Add washing powder or a detergent containing bleach. Note: . To prevent foaming, only use half the amount of detergent recommended by the detergent manufacturer.
  • Page 36: After-Sales Service

    After-sales service After-sales service If you cannot rectify a fault yourself, A f t e r - s a l e s s e r v i c e contact customer services. ~ Cover page We will always find an appropriate solution in order to avoid unnecessary visits by engineers.
  • Page 37: Consumption Rates

    Consumption rates Consumption rates Energy and water consumption, programme duration and C o n s u m p t i o n r a t e s residual moisture for the main washing programmes (approximate values) Programme Load Energy Water Programme consumption* consumption*...
  • Page 38: Efficiency Test Programmes For Cotton Fabrics

    Technical data Efficiency test programmes for cotton fabrics The following programmes (standard programmes, indicated by ü) are suitable for cleaning normally soiled cotton fabrics and are the most efficient with respect to combined energy and water consumption. Standard programmes for Cottons in accordance with the (EU) directive no. 1015/2010 Programme + temperature + button Load Approximate programme du-...
  • Page 39: Safety Instructions

    Positioning and connecting Useful tools Spirit level for aligning ■ Spanner with: ■ – WAF13 for loosening the transport braces, and – WAF17 for aligning the appliance feet Safety instructions Warning Risk of injury! The washing machine is very heavy. ■...
  • Page 40: Installation Surface

    Positioning and connecting Installation surface Installing the appliance in a kitchenette The washing machine be stable Note: so that it does not move around. Warning The installation surface must be firm ■ Danger of death! and level. There is a risk of electric shock if you Soft floors/floor coverings are not ■...
  • Page 41: Hose And Cable Lengths

    Positioning and connecting Take the hoses out of the holders. Hose and cable lengths Left-hand connection ■ Unscrew and remove all four transport brace screws. Remove the sleeves. To do this, remove the mains cable from the holders. Right-hand connection ■...
  • Page 42: Water Inlet

    Positioning and connecting Water inlet Optimum water pressure in the supply network Warning At least 100 kPa (1 bar) Danger of death! Maximum 1000 kPa (10 bar) There is a risk of electric shock if you When the tap is open, the water flow touch live components.
  • Page 43: Water Outlet

    Positioning and connecting Water outlet Connection Drainage into a washbasin Warning ■ Risk of scalding! When you are washing at high temperatures, there is a risk of scalding if you come into contact with hot water (e.g. when draining hot water into a washbasin).
  • Page 44: Levelling

    Positioning and connecting Levelling Notes The mains voltage and voltage ■ Align the appliance using a spirit level. indicated on the washing machine (rating plate) are the same. Incorrect alignment may result in loud The connected load and fuse noises, vibrations and machine required are specified on the rating "movement".
  • Page 45: Before Washing For The First Time

    Positioning and connecting Before washing for the first time The washing machine was thoroughly tested before leaving the factory. In order to remove any water which may be left over from the test, run the first washing cycle without any laundry. Notes The washing machine must be ■...
  • Page 46: Transportation

    Positioning and connecting Transportation Before switching on the appliance again: E.g. when moving house Notes Preparatory work: The transport braces must be ■ Turn off the tap. removed. Reduce the water pressure in the Pour approx. 1 litre of water into ■...
  • Page 47 Aqua-Stop warranty Aqua-Stop warranty Only for appliances with Aqua-Stop A q u a - S t o p w a r r a n t y In addition to warranty claims against the vendor based on the purchase agreement and to our appliance warranty, we will provide compensation under the following conditions: If water damage is caused due to a...
  • Page 48 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.) You can find the contact information for all countries in the attached after-sales service directory. BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München GERMANY siemens-home.com Manufactured by BSH Hausgeräte GmbH under Trademark License of Siemens AG *9001070973* 9001070973...

Table of Contents