Operating The Appliance; Preparing The Washing Machine; Switching On The Appliance/ Selecting A Programme - Siemens WM14W690EE Instruction Manual And Installation Instructions

1
Operating the
appliance
Preparing the washing
O p e r a t i n g t h e a p p l i a n c e
machine
The washing machine must be
Note:
correctly installed and connected.
From ~ Page 45.
Connect the mains plug.
1.
Turn on the tap.
2.
Open the door.
3.
Check that the drum is completely
4.
drained. Drain if necessary.
Switching on the appliance/
selecting a programme
Press the # button. The appliance is
switched on.
The Cottons programme set at the
factory is then always displayed.
You can use this programme or select a
different programme. The programme
selector can be turned in either
direction.
If you have activated the
Note:
childproof lock, you must deactivate it
before you can set a programme.
~ Page 27

Operating the appliance

The indicator light on the programme
selector lights up and the default
programme settings for the selected
programme appear in the display panel.
Temperature
■
Spin speed
■
The maximum load and the duration
■
of the programme (alternately)
The indicator light for the i-Dos
■
settings, if intelligent dosage has
been selected
Information on water and energy
■
consumption
In appliances with a drum light:
The drum is lit after switching on the
appliance, after opening and closing the
door and after starting the programme.
The light switches off automatically.
en
25