Table of Contents
Advertisement
2. Operations and Functions of Viewer (Cont.)
• Voltage Check (default setting : 12.0v)
Voltage Check for both driving and parking mode.
- Function for avoiding battery discharge and low battery protection
- Off: it operates without battery protection mode (NOT Recommended)
i.e. 11.6V : Stops operating when the voltage drops under 11.6V and restarts when voltage goes over 11.6V
- The battery protection voltage range is from 11.6V to 24.4V
Voltage check function may not work properly depends on the conditions of the motor vehicle
and the weather (temperature, humidity).
• Video Quality (default setting : High)
Video Quality @
1080P
High
- Adjust video quality of recording data. The main purpose is to extend the total recording hours of the
memory card. For instance, if video quality is set to "Low", it will occupy less memory capacity.
• LED indicator
- Set the LED indicator for both park and driving mode
- Recommend turning on for Driving mode for status indicator
FPS
Bitrate
30FPS
10Mbps
15FPS
5Mbps
7.5FPS
2.5Mbps
23
Advertisement
Table of Contents
