Table of Contents
Advertisement
2. Operations and Functions of Viewer (Cont.)
• Recording Frame setting (default setting : maximum)
- Maximum recording mode (Max. normal recording mode)
This is the normal recording mode which records a total of
The 30 FPS is shared between front which is
only using Front channel, then it will record full
overwrites new recording files on top of existing files. In case of event recording data, it erases the data
depends on the importance and time frame of the data
- Max recording mode (Max)
[Front]
Recorded at
20 FPS
:
[Rear]
Recorded at
10 FPS
:
- Mid-recording mode (Mid)
[Front]
Recorded at
15 FPS
:
[Rear]
Recorded at
15 FPS
:
- Minimum recording mode (Min) *Low video quality
7.5 FPS
[Front]
Recorded at
:
7.5 FPS
[Rear]
Recorded at
:
• G-Sensor Sensitivity setting [default setting : DRIVING = (X) 5, (Y) 5, (Z) 5
X-axis / Y-axis / Z-axis
- Adjusts the sensitivity of the shock sensor. Select detection level from 1 (min) to 10 (max),
VDR will determine the shock level based on the setting and save video recording as an 'Event'
Higher G-Sensor sensitivity level will lead to more events, which may
result in increased false positives. Level may be adjusted accordingly
based on individual vehicle, condition and driving pattern
30 FPS
(frames per second) for the entire system.
20 FPS
for the front channel and
30
FPS. If the memory card has reached its full capacity, it
PARKING = (X) 5, (Y) 5, (Z) 5
nd
10 FPS
for the 2
channel. If
20
Advertisement
Table of Contents
