Battery Status Indicator - VENTRA VDR-100 User Manual

2.2.2 Adjust the camcorder position
1. Loosen the knob to swivel
the device vertically or
horizontally.
2. Tighten the knob to
make sure the camera is
securely locked in place.
2.3 Connecting Power
Use only the supplied car adapter to power up the
camera and charge the built-in battery. camera and charge the built-in battery.
1. Connect one end of the car adapter to the USB
connector of the VDR-100.
USB port input: DC 5V / 1A.
06
2. Plug the other end of the car charger to the cigarette
lighter socket of the vehicle. Once the vehicle engine is
started, the camera automatically turns on. Car charger
input: DC 12 / 24V.
Important Note:
1.Use the product with the supplied charger only. Do NOT use
other power chargers to avoid camera damage or cause battery
explosion.
2.When using the VDR-100 for the first time, please fully charge
the camera battery.
3.Please note if the environment temperature reaches 113°F
or above, the car adapter will continue to supply power to
VDR-100, but will not charge the Lithium-ion battery for safety
reasons.

Battery Status Indicator

Icon Icon Description Description
Fully charged
75% charged
50% charged
25% charged
Low battery
Connect the car adapter
to charge the battery /
Battery is fully charged.
07