Information Before Installation - VENTRA VDR-600BT User Manual

1. Product Information
Instructions Before Operating this Product
 Thank you for selecting Ventra. The following is the safety instructions, product user manual and
product warranty information
 Please read these safety instructions thoroughly before operating the product and keep this
manual for future reference
 The VDR-600 main camera is designed to be installed inside of the vehicle to record front and rear
(or interior) with audio (can be disabled). This device is to encourage safe driving and provide video
documentation.
 The product may not be able to recognize a slight shock or a minor collision as an event. In this
case, you may press the event button to save the data as an event
 We strongly encourage you to use Ventra recommended micro SD memory cards. No standard
warranty service is provided by the manufacturer unless the product is used with the
recommended micro SD memory cards even within the warranty period
 Please be aware that micro SD memory card have limited product life expectancy and will eventually
degrade in time - causing errors in recordings / data corruption. It is highly recommended to format
and check the integrity of the micro SD card on a regular basis. Micro SD memory card related
problems are not under warranty and the manufacturer or the supplier is not responsible for your
data loss or missing recordings
Note: GPS Satellite Reception
 GPS signal may take 5~15 minutes to be connected when turning on the system for the first time, or
if the product has not been used for more than 3 days.
 GPS may lose reception in areas where high-rise buildings are present. Stop at a location where your
GPS can regain its reception, before proceeding again.
 Extreme weather conditions may interfere with the GPS reception. The operating temperature
should remain between 14F ~150F
4