Operation - HSM Securio P36is Operating Instructions Manual

Hide thumbs Also See for Securio P36is:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 11
https://www.supplychimp.com/
5

Operation

Switching on the shredder
• Only US-version: Set mains switch at rear of
paper shredder to „I".
• Check that no paper is in the slot of the
paper feed.
• Press the operation button.
 The "Ready for operation" indicator lights up.
Note
Paper and CD cutting unit cannot be used at
the same time. Only shred one kind of mate-
rial at a time.
Shredding paper
• Feed the paper into the centre of the paper
slot. The light barrier starts the cutting unit
automatically. Therefore, with thin paper
strips, make sure the light barrier detects
them.
NOTICE
Do not shred paper in the CD cutting unit.
This can cause damage.
 3 seconds after the light barrier in the paper
feed opening is free again, the cutting unit is
switched off automatically and the shredder
switches to standby.
Shredding CDs, credit cards and fl oppy disks
• Check whether your machine is certifi ed
for destroying these materials (see "Proper
use").
• For machines with a separate CD cutting unit
(optional), put the material in the feed slot of
this cutting unit. This protects you from splin-
14
ters. For machines without a separate CD
cutting unit, use the paper feed.
• Dispose the shredded material and the waste
paper separately.
Switching off the shredder
• Press the operation button.
 The "Ready for operation" indicator goes out.
• Only US-version: Set mains switch at rear of
paper shredder to „0".
Other function modes
• Permanent mode
Function: Cutting unit runs continuously.
If no material is fed in within a period of
2 minutes, the cutting unit shuts down and
the shredder switches to standby.
Start: Press the operation button for three
seconds.
Premature cancellation: Press the operation
button.
• Stand-by mode
Function: Two minutes after the last paper
feed operation, all consumers that are not
required are switched off automatically.
The „Ready for operation" indicator fl ashes
briefl y at regular intervals.
The shredder starts automatically when pa-
per is fed in.
• Automatic shutdown
Function: If the shredder is not used for
40 minutes, it shuts down completely and
therefore does not consume any more elec-
tricity (at night, at the weekend).
Restart: Press the operation button.
SECURIO P 36
english
09/2015

Advertisement

Table of Contents
loading

This manual is also suitable for:

Securio p36

Table of Contents