OPERATING INSTRUCTIONS
SHREDDER CONTROLS
Buttons
Switch Main Power Switch
Ⓑ
Press Power Button
to turn on.
Ⓑ
Press Power Button
to turn the power off.
Press and hold FWD to manually operate shredder in forward
Press and hold REV to manually operate shredder in reverse
OPERATION
1.
Turn on the main power switch in back of shredder
button Ⓑ. The following function buttons will illuminate: stand-by button Ⓑ,
the FWD Ⓒ and REV Ⓓ.
Ⓐ
to ON position.
Ⓒ
Ⓓ
Ⓐ
. Press the stand-by
Insert paper into paper feed slot Ⓖ. Do not fee more than 20 sheets at one
2.
time. The shredder will stop after paper has passed through.
To shred a CD, DVD or credit card insert through designated slot Ⓖ.
3.
After shredding, press the stand-by button Ⓑ to turn off the shredder and
4.
turn off the power switch in back of shredder Ⓐ.
5.
Empty the waste bin regularly to prevent jams and damage to cutting
mechanism.
This unit is equipped with jam-alert technology. The jam-alert icon Ⓕ will blink
indicating that the maximum sheet capacity has been exceeded. Reduce the number
of sheets and place the paper back into the paper feed.
BIN FULL
.
When waste bin is full, a green "Full" light will flash
.
STANDBY MODE
The shredder is equipped with an energy saving standby mode which will activate
after 30 minutes of being idle. To resume, press the stand-by button Ⓑ.
JAM-ALERT
Ⓕ
.