Sony HBD-E385 Service Manual page 25

12. Factory Initialize (Factory Settings)
There is a possibility that this mode cannot be correctly executed.
Never use this mode.
13. Network (Network Test Diagnosis Screen: Ifconfi g)
Network menu for the wired ethernet.
Screen 1: Ifconfi g Test
Operation:
[ ] Activate Ifconfi g (Display network setting)
[,] Select ping test
[RETURN] Returns to the top menu of the service mode
Screen 2: Ping Test
Operation:
[ ] Select Ifconfi g test
<
[RETURN] Returns to the top menu of the service mode
(The details of a Ping test are "14. Network (Network Test Diagno-
sis Screen: Ping)")
Screen 3: Ifconfi g Test Active
Display Ifconfi g command results.
Operation:
[ ] Ifconfi g retry
[,] Select Ping Test
[RETURN] Returns to the top menu of the service mode
Network
Test: Ifconfig Ping
Network
Test: Ifconfig
Ping To:
[START]
Network
HELP : [DOWN][ENT][(NUM)]
Test: Ifconfig
(Screen 1)
IP 192. 168. 11. 2 MAC 00-16-01-85-21-A3
HELP : [DOWN][ENT][(NUM)]
(Screen 2)
HELP : [ENT]: Re/Exe [RIGHT]
(Screen 3)
14. Network (Network Test Diagnosis Screen: Ping)
Ping test for the wired ethernet.
Screen 1: Ping Test
Operation:
[ ] Select Ifconfi g test
<
[ ] Ping execution preparation
m
[RETURN] Returns to the top menu of the service mode
Ping
Ping
Screen 2: The IP address of the Ping point is set up
(IP address input mode)
When "Ping to :>" is reversed, the [ ] button is pressed and IP
is inputted.
Operation:
[ ] Finish to input
[RETURN] Finish to input
[ ] Finish to input and Select Ifconfi g Test
<
[0] to [9] Input Character sting '0-9'
[TIME] Input Character sting '.'
[CLEAR] Backspace
Screen 3: Ping Test Active
When [START] is reversed, the [ ] button is pressed and execute
ping.
Operation:
[ ] Activate ping test
[ ] The IP address of the ping point is set up
M
[RETURN] Returns to the top menu of the service mode
Network
Test: Ifconfig Ping
Ping To :
[START]
Network
Test: Ifconfig Ping
Ping to :> 192. 168. 200. 13
[ENT] : Release
[RET] : Release
Network
(Screen 1)
Test: Ifconfig
Ping to : 192. 168. 200. 13
PING 192. 168. 200. 13 OK!
(Screen 2)
HELP: [ENT] : Start [UP] [LEFT]
(Screen 3)
15. System Information (System Information Display)
This screen displays system information.
Screen 1: Basic Information
Operation:
[ ] Drive information (delta IOP of a drive is measured)
,
and wireless device information (E385/E390/T39) dis-
played (go to Screen 2)
[RETURN] Returns to the top menu of the service mode
Screen 2: Drive and Wireless Information Menu
Operation:
[ ] Basic Information displayed (go to Screen 1)
<
[RETURN] Returns to the top menu of the service mode
When delta IOP is measured, it becomes impossible to use the
Version Up function.
HBD-E385/E390/T39
Ping
[START]
25