Smeg Dolce Stil Novo PXL675LAU Manual page 20

5. Remove the screws that fasten the hob
top to the burner casing (the figure shows
the 60 cm model as an example).
6. Lift the hob top and remove it.
22
Installation
Replacing nozzles
1. Unscrew screw A and push air regulator B
as far as it will go.
2. Use a spanner to remove the nozzles C
and install the new ones for the required
gas supply, following the indications
given in the relevant table.
3. Adjust the air flow by moving the air
regulator B to obtain the distance D
given in the corresponding table.
4. After adjusting each burner, reassemble
the appliance correctly.
The nozzle tightening torque must
be no more than 3 Nm.