Related Manuals for Synergy Global Technology Combo DB-15 ip 2-console KVM
Summary of Contents for Synergy Global Technology Combo DB-15 ip 2-console KVM
- Page 1 Toll Free: 1-888-865-6888 Tel: 510-226-8368 Fax: 510-226-8968 Email: sales@RackmountMart.com...
- Page 2 User Manual Combo DB-15 2-console KVM LCDK1038 / 1039 Combo DB-15 2-console KVM LCDK1024 / 1025 Combo DB-15 KVM LCDK1020 / 1021 www.RackmountMart.com...
- Page 3 Legal Information First English printing, October 2002 Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. We are not liable for any injury or loss that results from the use of this equipment.
-
Page 4: Table Of Contents
Contents < Part 1 > Combo DB-15 2-console KVM LCDK1038 / 1039 Package contents KVM port connection IP & Local console connection IP console setting KVM Cascade Specifi cations < Part 2 > Combo DB-15 2-console KVM LCDK1024 / 1025 Package contents KVM port connection Remote &... - Page 5 Before Installation ■ It is very important to mount the equipment in a suitable cabinet or on a stable surface. ■ Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive dust, dirt, heat, water, moisture and vibration. Unpacking The equipment comes with the standard parts shown in package content.
-
Page 6: Part 1 > Combo
< Part 1 > Combo DB-15 < 1.1 > Package Contents Combo DB-15 IP KVM LCDK1038 / 1039 KVM unit • LCDK1038 or LCDK1039 KVM unit x 1 • Mounting set w/ bracket & screws x 1 • Power adapter w/ power cord ( for KVM ) x 1 LCDK1038 Local Console Power... -
Page 7: Kvm Port Connection
< 1.2 > KVM port connection Combo DB-15 IP KVM LCD-A3001 / 3002 / 3003 USB Servers ■ 6 / 10 / 15 ft Combo KVM cable ■ Support PS/2 or USB server DB-15 Combo KVM port LCD-A3001 / 3002 / 3003 Combo KVM cable support PS/2 or USB server PS/2 Servers <... -
Page 8: Ip Console Setting
< 1.4 > IP console setting Combo DB-15 IP KVM After the cable connection, please take the following steps to confi gure the IP KVM : 1. Download IPKVMsetup.exe from the link: http://www.rackmountmart.com/downloads.html 2. Double click IPKVMsetup.exe to confi gure the IP KVM by device setup as below. 3. -
Page 9: Kvm Cascade
< 1.5 > KVM Cascade Combo DB-15 IP KVM ■ Cascade up to 8 levels, 128 servers ■ Cascading multiple KVM with LCD-A1019 cascade cable. Cascaded KVMs from level 2 to 8 must be the models of LCDK1020 / 1021. When multiple combo DB-15 KVMs cascade together, the master KVM at level 1 will take all control of other slave KVM switches (e.g. -
Page 10: Specifi Cations
< 1.6 > Specifi cations Combo DB-15 IP KVM LCDK 1038 / 1039 KVM Port ▀ Number of ports: 8 or 16 Connector: DB-15 combo connector Connectivity: Combo 4-in-1 KVM cable, up to 6, 10 & 15 feet Local Console ▀... -
Page 11: Part 2. Combo Db-15 2-Console Kvm
Part 2. Combo DB-15 2-console KVM < 2.1 > Package Contents Combo DB-15 2-console KVM LCDK1024 / 1025 • LCDK1024 or LCDK1025 KVM unit x 1 • Mounting set w/ bracket & screws x 1 KVM unit • Power adapter w/ power cord ( for KVM ) x 1 •... -
Page 12: Kvm Port Connection
< 2.2 > KVM port connection Combo DB-15 2-console KVM LCD-A3001 / 3002 / 3003 USB Servers ■ 6 / 10 / 15 ft Combo KVM cable ■ Support PS/2 or USB server DB-15 Combo KVM port LCD-A3001 / 3002 / 3003 Combo KVM cable support PS/2 or USB server PS/2 Servers <... - Page 13 How to use a receiver to connect a remote console Combo DB-15 2-console KVM Receiver Local Computer Monitor Remote I/O Front Power Rear Local Remote Mouse Button Button KVM switch The receiver provides a hotkey function for remote console. Please refer to P.18 Monitor Remote Console...
-
Page 14: Kvm Cascade
< 2.4 > KVM Cascade Combo DB-15 2-console KVM ■ Cascade up to 8 levels, 128 servers ■ Cascading multiple KVM with LCD-A1019 cascade cable. Cascaded KVMs from level 2 to 8 must be the models of LCDK1020 / 1021. When multiple combo DB-15 KVMs cascade together, the master KVM at level 1 will take all control of other slave KVM switches (e.g. -
Page 15: Specifi Cations
< 2.5 > Specifi cations Combo DB-15 2-console KVM LCDK1024 / 1025 KVM Port ▀ Number of ports: 8 or 16 Connector: DB-15 combo connector Connectivity: Combo 4-in-1 KVM cable, up to 6, 10 & 15 feet Local Console ▀ Graphic connector: 1 x DB-15 VGA Resolution:... -
Page 16: Part 3. Combo Db-15 Kvm
Part 3. Combo DB-15 KVM < 3.1 > Package Contents Combo DB-15 KVM LCDK1020 / 1021 KVM unit • LCDK1020 or LCDK1021 KVM unit x 1 • Mounting set w/ bracket & screws x 1 • Power cord ( for KVM ) x 1 LCDK1020 Local Console Power... - Page 17 < 3.2 > KVM port connection Combo DB-15 KVM LCD-A3001 / 3002 / 3003 USB Servers ■ 6 / 10 / 15 ft Combo KVM cable ■ Support PS/2 or USB server DB-15 Combo KVM port LCD-A3001 / 3002 / 3003 Combo KVM cable support PS/2 or USB server PS/2 Servers P.12...
- Page 18 < 3.3 > KVM Cascade Combo DB-15 KVM ■ Cascade up to 8 levels, 128 servers ■ Cascading multiple KVM with LCD-A1019 cascade cable. Cascaded KVMs from level 2 to 8 must be the models of LCDK1020 / 1021. When multiple combo DB-15 KVMs cascade together, the master KVM at level 1 will take all control of other slave KVM switches (e.g.
-
Page 19: Lcdk1020 / 1021
< 3.4 > Specifi cations Combo DB-15 KVM LCDK1020 / 1021 ▀ KVM Port Number of ports: 8 or 16 Connector: DB-15 combo connector Connectivity: Combo 4-in-1 KVM cable, up to 6, 10 & 15 feet ▀ Local Console Graphic connector: 1 x DB-15 VGA Resolution: Up to 1920 x 1080 / 1920 x 1200... -
Page 20: Part 4. Usage
Part 4. Usage Combo DB-15 KVM Usage 4.1 KVM Button Power ON ■ Turn off all servers and KVM switches ■ Make sure all cables / connectors are properly connected ■ Recommend Power ON sequence is monitor, KVM switch fi nally computer Front Panel - Port LED Indications 8 ports Bank no. -
Page 21: Password
4.2 Password Combo DB-15 KVM Usage The password is enabled by default, the default password is “00000000” eight zeros (Do not use “0” on number pad) ■ Enable password Scroll Lock + Scroll Lock + U Press the KVM hotkey Scroll Lock + Scroll Lock + P Logout the KVM by pressing the hotkey In SUPERVISOR level, enter “00000000”... -
Page 22: Kvm Osd
4.3 KVM OSD Combo DB-15 KVM Usage OSD Menu OSD operation next to the system name The PC is powered on next to the system name The PC is selected Access F1 MAIN MENU Logout the OSD menu Previous menu Cancel / Quit Enter Complete / Switch to selected port... -
Page 23: Kvm Hotkey & Remote Console Hotkey
4.4 KVM Hotkey & Remote Console Hotkey Combo DB-15 KVM Usage Local Console Hotkey Function Scroll Lock + Scroll Lock + Space Bar Calling OSD menu Right-button mouse + Esc Calling OSD menu Scroll Lock + Scroll Lock + Switch to previous port Scroll Lock + Scroll Lock + Switch to next port Scroll Lock + Scroll Lock +... -
Page 24: Dc Power 12V, 24V, 48V Input
The company reserves the right to modify product specifi cations without prior notice and assumes no responsibility for any error which may appear in this publication. All brand names, logo and registered trademarks are properties of their respective owners. Copyright 2013 Synergy Global Technology Inc. All rights reserved. P.19 www.RackmountMart.com...
Need help?
Do you have a question about the Combo DB-15 ip 2-console KVM and is the answer not in the manual?
Questions and answers