Note When Setting Up - Panasonic KX-TG8563AZ Operating Instructions Manual

Getting Started
Battery installation
R USE ONLY Ni-MH batteries AAA (R03)
size.
R Do NOT use Alkaline/Manganese/Ni-Cd
batteries.
R Confirm correct polarities (
Rechargeable Ni-MH ONLY
R When the region setting is displayed, see
page 33.
Battery charging
Charge for about 7 hours.
R When the batteries are fully charged,
"Fully charged" is displayed.
Confirm "Charging" is displayed.
10

Note when setting up

Note for connections
R The AC adaptor must remain connected at
, ).
R The AC adaptor should be connected to a
R The unit is not designed to be used with
R The unit's answering system will not
Note for battery installation
R Use the supplied rechargeable batteries.
R Wipe the battery ends (
R Avoid touching the battery ends (
Note for battery charging
R It is normal for the handset to feel warm
R Clean the charge contacts of the handset,
Battery level
Icon
all times. (It is normal for the adaptor to feel
warm during use.)
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight of
the adaptor may cause it to become
disconnected.
rotary/pulse dialling services.
answer incoming calls on your FaxAbility
number. (for New Zealand)
For replacement, we recommend using the
Panasonic rechargeable batteries noted on
page 4, 6.
cloth.
the unit contacts.
during charging.
base unit, and charger with a soft and dry
cloth once a month. Before cleaning the
unit, disconnect from power outlets and any
telephone line cords. Clean more often if
the unit is exposed to grease, dust, or high
humidity.
Battery level
High
Medium
Low
, ) with a dry
, ) or