Key Lock; Power Back-Up Operation - Panasonic KX-TG8563AZ Operating Instructions Manual

Making/Answering Calls
conversation is to be recorded. In case you
record without informing the other party, it
will cause the infringement of privacy and
civil liability.
1
Press during an outside call.
2
MbN: "Record Call" a
R A beep is heard and recording starts.
R A beep sounds every 15 seconds and
can be heard by the other party.
3
To stop recording, press
Note:
R To listen to the recorded conversation, see
page 43, 44.
For Australia
R All persons using this device for recording
telephone conversations shall comply with
Australian laws. This requires that at least
one party to the conversation is to be aware
that it is being recorded. In addition, the
principles enumerated in the
AustraliaTelecommunications (Interception
and Access) Act 1979 shall be complied
with in respect to the nature of the personal
information collected, the purpose for its
collection, how it is used and what is
disclosed to any other party.
For New Zealand
R All persons using this device for recording
telephone conversations shall comply with
New Zealand law. This requires that at
least one party to the conversation is to be
aware that it is being recorded. In addition,
the principles enumerated in the Privacy
Act 1993 shall be complied with in respect
to the nature of the personal information
collected, the purpose for its collection, how
it is used and what is disclosed to any other
party.
Call share
You can join an existing outside call.
To join the conversation, press M
the other handset is on an outside call.
Note:
R A 2nd handset cannot join an outside call
that is being recorded (page 17).
18
R To prevent other users from joining your
conversations with outside callers, turn the
privacy mode on (page 28).

Key lock

The handset can be locked so that no calls or
settings can be made. Incoming calls can be
answered, but all other functions are disabled
.
while key lock is on.
To turn key lock on, press
seconds.
R
R To turn key lock off, press
seconds.
Note:
R Calls to emergency numbers cannot be
made until key lock is turned off.

Power back-up operation

When a power failure occurs, the charged
handset temporarily supplies power to the
base unit (power back-up mode). This allows
you to make and receive calls using a handset
during a power failure. The base unit will not
perform any other functions. You can program
"Power Failure" and the default setting is
"Auto" (page 28).
Important:
R If a handset is not placed on the base unit
when a power failure occurs,"Base no
power Press e" is displayed. After
pressing M
on the base unit to start power back-up
mode.
R Power back-up mode will not work if the
battery level of the power supplying
handset is
N when
R Do not lift the power supplying handset
from the base unit during power back-up
mode.
R Do not touch the handset's charge contacts
during power back-up mode.
R If the battery level is low, the unit will not
work sufficiently during power back-up
is displayed.
N on the handset, place it
/ .
for about 3
for about 3