Note When Setting Up - Panasonic KX-TG2723AL Operating Instructions Manual

Digital cordless answering system
Table of Contents

Advertisement

Getting Started

Note when setting up

Note for connections
R The AC adaptor must remain connected at
all times. (It is normal for the adaptor to feel
warm during use.)
R The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight of
the adaptor may cause it to become
disconnected.
R The unit is not designed to be used with
rotary/pulse dialling services.
During a power failure
The unit will not work during a power failure.
We recommend connecting a corded-type
telephone (without AC adaptor) to the same
telephone line or to the same telephone line
socket using a telephone double adaptor.
Note for battery installation
R Use the supplied rechargeable batteries.
For replacement, we recommend using the
Panasonic rechargeable batteries noted on
page 4, 6.
R Wipe the battery ends (
cloth.
R Avoid touching the battery ends (
the unit contacts.
Note for battery charging
R It is normal for the handset to feel warm
during charging.
R Clean the charge contacts of the handset,
base unit, and charger with a soft and dry
cloth once a month. Before cleaning the
unit, disconnect from power outlets and any
telephone line cords. Clean more often if
the unit is exposed to grease, dust, or high
humidity.
10
TG2721_22AL(en)_0730_ver001.pdf
TG2721_22AL(en)_0730_ver001.pdf
Battery level
Icon
Panasonic Ni-MH battery
performance (supplied batteries)
Operation
In continuous use
Not in use (standby)
Note:
R It is normal for batteries not to reach full
capacity at the initial charge. Maximum
battery performance is reached after a few
complete cycles of charge/discharge (use).
R Actual battery performance depends on
usage and ambient environment.
R Even after the batteries are fully charged,
the handset can be left on the base unit or
charger without any ill effect on the
batteries.
,
) with a dry
R The battery level may not be displayed
correctly after you replace the batteries. In
,
) or
this case, place the handset on the base
unit or charger and let it charge for at least
7 hours.
10
10
Battery level
High
Medium
Low
Needs charging.
Operating time
20 hours max.
170 hours max.
2012/07/30
2012/07/30
16:53:04
16:53:04

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-tg2722alKx-tg2721al

Table of Contents