Technibel Climatisation CAFM 74 R Instruction Manual page 28

Indoor unit
30°
Zone
60°
''A'' for
cooling
Zone ''B'' for
heating
This air conditioner is not
equipped with an auto flap.
(Manual adjusting only)
28
Adjusting the Airflow Direction (continued)
Wall mounted type (MAFM)
A. Vertical directions (automatic)
Confirm that the remote control unit has been turned on. Press the FLAP
button to start the flap moving up and down. If you want to stop the flap
movement and to direct the air in the desired direction, press the FLAP button
again. In the cool mode, don't direct the flap down more than 30°, otherwise,
condensation may drip on to the floor. Zone ''A'' is the recommended flap
position for cooling.
CAUTION
B. Horizontal directions (manual)
The horizontal airflow direction can be adjusted manually by moving the
vertical vanes to the left or right.
Left
Vertical
vanes
Semi-concealed type
1-way type (CAFM1V)
Hold the flap and move it up and down to adjust the direction of the airflow.
When the flap moves, the line engraved on the rim of the disc will move up
and down.
In the cool mode, manually adjust the angle of the flap so that the indicator is
in line with the blue rectangular mark on the label.
Otherwise, condensation may drip onto the floor.
In the heat mode, adjust the flap so that the indicator is in line with the red
rectangular mark.
Do not move the flap with your hands.
Right
Air outlet
grille
Flap
Label
Indicator
disc
Up
Flap
Down
Indicator line
For cooling
(blue)
For heating
(red)
OI-729-28-EG