Technibel Climatisation CAFM 74 R Instruction Manual page 21

F: FILTER button
G: CHECK button
CAUTION
H: UNIT button
I: FLAP button
CAUTION
OI-729-21-EG
Parts Name and Functions (continued)
This button is used to turn off the filter sign (
on the display, clean the filter, and then press this button to turn off the sign.
This button is used only when servicing the air conditioner.
Do not use the CHECK button for normal operation.
When more than one indoor unit is connected, this button is used to select a
unit when adjusting the airflow direction.
If no unit is selected, the airflow direction of all units can be adjusted
concurrently using the FLAP button.
1. Use this button to set the airflow direction to a specific angle.
The airflow direction is displayed on the remote control unit.
Operation mode
(COOL) or
(HEAT) or
(AUTO)
Cooling mode:
Heating mode:
• In the cool mode and dry mode, if the flaps are set in a downward
position, condensation may form and drip around the vent.
• Do not move the flap with your hands.
NOTE This function is available only for models CAFM, CAFM1VS, CAFM2V,
SPAFM and MAFM.
(SWEEP) 2. Use this button to make the airflow direction sweep up and down
automatically.
Press this button several times until the
display.
To stop the swing operation
Press the FLAP button again during the flap swing operation to stop the flap
at the desired position. Then, the airflow can be set from the top position by
pressing the FLAP button again.
Indicator when swing operation is stopped
Fan and heating
During cooling and drying, the flap does not stop at the downward position.
Even if the flap is stopped at the downward position during the swing
operation, it does not stop until it moves to the third position from the top.
This function is available only for models CAFM, CAFM1VS, CAFM2V,
NOTE
SPAFM and MAFM.
). When the filter sign appears
Number of airflow direction settings
(DRY)
(FAN)
Cooling and drying
3
5
3
5
symbol appears on the
21