Using The Blind Stitch Foot - Brother BX3000 Operation Manual

USING ATTACHMENTS AND APPLICATIONS — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Using the blind stitch foot

This foot comes in handy not only for stretch blind hem
stitching, but also for sewing fabric edges and seams.
■ When edge stitching
Needle
Available stitch width (
Single
Straight stitch
(middle or right needle position)
Turn off the machine.
a
Attach the blind stitch foot.
b
Turn on the machine.
CAUTION
●
Do not turn on the machine while pressing
down the foot controller. The machine
may start unexpectedly and cause
personal injury or damage to the machine.
Position the needle the distance you want
c
the stitch to be from the edge of the fabric,
and then lower the needle in that position.
Turn the foot guide screw and carefully
d
adjust to guide the fabric.
1
2
1 Screw
2 Guide
39
Available
stitch
)
length
F-4
2
1
■ When sewing seams
Needle
Available stitch width (
5
Single
2
2-5
Turn off the machine.
a
Attach the blind stitch foot.
b
Turn on the machine.
CAUTION
●
Do not turn on the machine while
pressing down the foot controller. The
machine may start unexpectedly and
cause personal injury or damage to the
machine.
Align the foot guide with the needle
c
position.
Turn the pattern selection dial to set it to
d
the desired width.
Place the fabric under the foot so the foot
e
guide is aligned between both edges of the
fabric.
Lower the presser foot and start sewing.
f
Available
stitch
)
length
1-2