Using The Blind Stitch Foot - Brother JK2700NT Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Using the blind stitch foot

Stitch
Pattern
Name
Straight
Stitch
Zigzag
Stitch
Blind
Hem
Stitch
Stretch
7
Blind
Hem
Stitch
This foot comes in handy not only for blind hem
stitching, but also for sewing fabric edges and seams.
■ When edge stitching
Turn off the machine.
1
Attach the blind stitch foot.
2
Turn on the machine.
CAUTION
●
Do not turn on the machine while pressing
down the foot controller. The machine
may start unexpectedly and cause
personal injury or damage to the machine.
Position the needle the distance you want
3
the stitch to be from the edge of the
fabric, and then lower the needle in that
position.
Turn the foot guide screw and carefully
4
adjust to guide the fabric.
2
1 Screw
2 Guide
Stitch Length Stitch Width
[mm (inch)]
2
Any
3
1-4
(1/16-3/16)
4
F-2
(1/64-1/16)
F-1.5
(1/64-1/16)
1
2
■ When sewing seams
Turn off the machine.
1
Attach the blind stitch foot.
2
[mm (inch)]
Turn on the machine.
Any
●
Do not turn on the machine while pressing
down the foot controller. The machine
0-6.5
may start unexpectedly and cause
(0-1/4)
personal injury or damage to the machine.
Set the pattern selection dial to the
3
3-6.5
Straight Stitch, and then set the stitch
(1/8-1/4)
width at "2.5" (3/32 inch) (center). Align
the foot guide with the needle position.
3-6.5
Set the pattern selection dial to the Zigzag
4
(1/8-1/4)
Stitch.
Place the fabric under the foot so the foot
5
guide is aligned between both edges of the
fabric.
Lower the presser foot and start sewing.
6
■ When blind hem stitching
When blind hem stitching using the blind stitch
foot, turn the screw to adjust the guide to the folded
hem.
1
CAUTION
• For more details on blind hem stitching, see
page 30.
1 Screw
2 Guide
3 Folded hem
1
2
3
42
5