Optional Accessories; Using The Blind Stitch Foot - Brother XN-2500 Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Baste the cut design to the fabric.
1

OPTIONAL ACCESSORIES

Using the blind stitch foot

Stitch Name
Straight Stitch
(Center Needle
Position)
Zigzag Stitch
Zigzag Stitch
Zigzag Stitch
Stretch Blind
Hem Stitch
This foot comes in handy not only for stretch blind hem
stitching, but also for sewing fabric edges and seams.
Stitch
Stitch Width
Pattern Length
[mm (inch)]
[mm (inch)]
3
Any
4
1-4
1.5 (1/16)
(1/16-3/16)
5
1-4
3.5 (1/8)
(1/16-3/16)
6
1-4
5 (3/16)
(1/16-3/16)
9
F-1.5
(1/64-1/16)
Carefully sew around the edge of the
2
design with a zigzag stitch.
■ When edge stitching
Turn off the machine.
1
Attach the blind stitch foot.
2
Turn on the machine.
Position the needle the distance you want
3
the stitch to be from the edge of the
—
fabric, and then lower the needle in that
position.
Turn the foot guide screw and carefully
4
adjust to guide the fabric.
3 (1/8)
1 Screw
2 Guide
■ When sewing seams
Turn off the machine.
1
Attach the blind stitch foot.
2
Turn on the machine.
Set the pattern selection dial to the
3
Straight Stitch (Center Needle Position).
Align the foot guide with the needle
position.
Set the pattern selection dial to the Zigzag
4
Stitch (1.5 mm, 3.5 mm or 5 mm) with the
desired width.
1
2
2
5
1
38