Wireless Remote Controller - Friedrich C36YJ Owner's Manual

Wireless Remote Controller

1
2
3
4
5
6
7
8
9
Operation Mode
Cooling Mode
Auto Operation
Dehumidification mode
Heating Mode
• Cooling Model( ), Heat Pump Model(
NOTE
❈ Some functions may not be operated and displayed depending on the product type.
1. ENERGY SAVING Button
Used to set or clear Energy saving.
2. FAN Button
Used to select Fan mode.
3. ON/OFF Button
Used to turn on/off the unit.
4. SURGE Button
10
Speed cooling operates super high fan speed.
11
12
5. LEFT/RIGHT AIRFLOW Button (OPTIONAL)
Used to set the desired left/right(horizontal) airflow
13
direction.
6. UP/DOWN AIRFLOW Button
14
Used to stop or start louver movement and set the
desired up/down airflow direction.
15
16
7. ON TIMER Button
Used to set the time of starting operation.
17
8. SLEEP TIMER Button
Used to set the time of sleeping operation.
9. SET / CLEAR Button
Used to set/clear the timer.
Used to set the current time(if it input for 3sec.)
10. AUTO CLEAN Button
Used to set or clear Auto clean.
11. ROOM TEMPERATURE SETTING Button
Used to select the room temperature.
12. OPERATION MODE SELECTION Button
Used to select the operation mode.
13. INDOOR FAN SPEED SELECTION Button
Used to select fan speed in four steps low, medium,
high and chaos.
)
14. ROOM TEMPERATURE CHECKING Button
Used to check the room temperature.
15. OFF TIMER Button
Used to set the time of stopping operation.
16. TIMER SETTING(Up/Down)/LIGHT Button
Used to set the timer.
Used to adjust the brightness.(if it is not time adjust
mode)
17. RESET Button
Used to reset the remote controller.
Operating Instructions
Owner's Manual 9