Vivotek IP7130 User Manual page 6

VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Hardware Reset
Status LED
Indented Reset
Button
The reset button is used to reset the system or restore the factory default settings� Sometimes
resetting the system can return the camera to normal operation� If the system problems remain
after reset, restore the factory settings and install again.
Reset: Press and release the indented reset button with a paper clip or thin object� Wait for the
Network Camera to reboot�
Restore: Press and hold the reset button until the status LED rapidly blinks� It takes about 30
seconds. Note that all settings will be restored to factory default. Upon successful restore, the
status LED will blink green and red during normal operation�
6 - User's Manual