Application Configuration Url - Vivotek VisualServer VS3102 User Manual

method Tone (ATDT)
Pulse (ATDP)
reatt <integer>
discon <integer>
init <text string shorter than 40 characters> command to initialize modem
phone1 <text string shorter than 40 characters> phone number of primary ISP
user1 <text string shorter than 40 characters> user name for primary ISP
pass1 <text string shorter than 40 characters> password for primary ISP
phone2 <text string shorter than 40 characters> phone number of secondary ISP
user2 <text string shorter than 40 characters> user name for secondary ISP
pass2 <text string shorter than 40 characters> password for secondary ISP

Application configuration URL

URL: /setup/app.cgi
NAME VALUE
emode <not required>
smode <not required>
smethod mail
ftp
suffix <not required>
delay <integer>
inter <integer>
dihigh < not required >
dilow < not required >
dirise < not required >
difall < not required >
motion1 < not required >
motion2 < not required >
motion3 < not required >
ioalarm < not required >
make modem dial in tone
make modem dial in pulse
redial attempts
minutes delay before disconnection
DESCRIPTION
event mode application
sequential mode application
upload snapshots by email
upload snapshots by FTP
FTP file with date and time suffix
seconds delay to detect next event
seconds delay to capture post-event
set DI high as trigger condition
set DI low as trigger condition
set DI rising as trigger condition
set DI falling as trigger condition
set motion window1 as trigger condition
set motion window2 as trigger condition
set motion window3 as trigger condition
trigger DO when DI condition matched
90
www.vivotek.com
T: 886-2-22404099
F: 886-2-22404097