Ptz Camera Control - Vivotek VisualServer VS3102 User Manual

PTZ camera control

A PTZ motorized camera is provided by customers and should be correctly installed in advance. The
control button under the video allows users to control the motorized camera attached to VisualServer with
pan/tilt direction and zoom. To access the location set previously, pull down the Preset Position list to
select one and click on . Only the administrator can preset the camera locations. Primary users are
only allowed to browse the preset locations. Five buttons below the image can be used to control cameras
in ways other than pan, tilt and zoom. They should be pre-configured by administrators with reference to
the instruction manual of the cameras.
<url>
http://<VisualServer>
<VisualServer> is the domain name or pure IP address of VisualServer.
40
www.vivotek.com
T: 886-2-22404099
F: 886-2-22404097