Network Settings - Vivotek VisualServer VS3102 User Manual

Network settings

Any change made to this page will make the system restart to validate. Make sure every field is correctly
typed before clicking on .
To eliminate incautious mistakes during installation, VisualServer will stay in installation mode whenever
it starts unless "Reset network at next boot" is disabled. This option can also be disabled using the
Installer program. Once the option is disabled, VisualServer will skip installation at the next boot and the
Installer program will not find the installed units. That implies that VisualServer cannot be accessed if no
one remembers the IP address, except by restoring factory default settings. However, with this option
disabled VisualServer can automatically operate normally after restarting in case of losing power. This
47
www.vivotek.com
T: 886-2-22404099
F: 886-2-22404097