On/Measure Important paragraphs which must be adhered to in practice as they enable the product to be used in a technically correct and efficient manner. Area / Units ® Bluetooth Clear / Off Leica DISTO E7100i 812795b...
Instrument Set-up Display Insert batteries To ensure a relia- Info ble use, do not use zinc-carbon batteries. Change batteries when battery Battery symbol is flashing. Area ® Bluetooth Units Main line Attach / Remove clip click! Leica DISTO E7100i 812795b...
Device is turned Undo last action. Leave actual func- OFF. tion, go to default operation mode. Unit setting Switch between the following units: 2 sec 0.000 m 0.00 ft 0.0000 m 0‘00‘‘ 1/32 0 in 1/32 Leica DISTO E7100i 812795b...
Aim active laser at target. Permanent measuring The last value measured is dis- played. 2 sec Stops permanent measuring. 8.532 Aim active laser at target. Area 24.352 Aim laser at first Aim laser at sec- target point. ond target point. Leica DISTO E7100i 812795b...
® The efficient and innovative Bluetooth Smart module (with the new For more details, see our homepage. ® ® Bluetooth standard V4.0) works together with all Bluetooth Smart Leica DISTO E7100i 812795b...
- 10 ºC to + 50 ºC Tolerance** Area *** Tolerances apply from 0.2 m to 5 m with a confidence Range at Leica target plate 70 m / 230 ft level of 95%. The maximum tolerance may deteriorate to Beep GZM26 0.1 mm/m.
• Never immerse the device in water. Warranty coverage for the entire usage time contact the dealer. of the product according to Leica Geosys- • Never use aggressive cleaning agents or If the message InFo appears with a number, tems International Limited Warranty. Free of solvents.
• Deliberate dazzling of third parties; also in Changes or modifications not expressly material, financial and environmental the dark approved by Leica Geosystems for compli- damage. • Inadequate safeguards at the surveying site ance could void the user’s authority to Important paragraphs which must be (e.g.
• Connect the equipment into an outlet on a of the original equipment: circuit different from that to which the WARNING Leica Geosystems AG receiver is connected. The device conforms to the most stringent Heinrich-Wild-Strasse requirements of the relevant standards and •...
• Do not use the product near medical equipment. Subject to change (drawings, descriptions • Do not use the product in airplanes. and technical data) without prior notice. Leica DISTO E7100i 812795b...
Page 13
Quality Management and Quality Systems (ISO standard 9001) and Environ- mental Management Systems (ISO standard 14001). Total Quality Management - Our commitment to total customer satisfaction. Ask your local Leica Geosystems agent for more information about our TQM program. Copyright Leica Geosystems AG, Heerbrugg,...