Table of Contents
Advertisement
LCD screen message
Condition/solution
Check that the printer
Make sure the printer port is selected correctly on the Port tab of the Printer
driver is installed on the
Properties screen (Windows) or the System Properties > USB list (Mac).
computer and that the
Select USBXXX for a USB connection or EpsonNet Print Port for a network
port settings for the
connection.
printer are correct.
Check that the printer
driver is installed on the
computer and that the
USB port settings for the
printer are correct.
Recovery mode
An error has occurred during firmware updating. Connect your product using
a USB cable and try updating the firmware again. If you still receive this error
message, contact Epson for support.
Note: The ink pads in the printer collect, distribute, and contain the ink that is not used on printed pages.
During the life of your product it may reach a condition where either satisfactory print quality cannot be
maintained or the ink pads have reached the end of their usable life. The Epson Status Monitor, your
LCD screen, or lights on the control panel will advise you when these parts need replacing. If this
happens during the standard warranty of the product, the exchange of the product or replacement of the
pads is covered under the standard warranty. If the product is out of warranty, the pads can be replaced
by any Epson authorized service provider. The waste ink pads are not a user-replaceable part.
Parent topic:
Solving Problems
Related references
Paper Jams Inside the Product
Where to Get Help
Basic Settings - Fax
Related tasks
Selecting the Paper Settings - Control Panel
Accessing the Web Config Utility
Connecting a Telephone or Answering Machine
Related topics
Loading Paper
Replacing Ink Cartridges and Maintenance Boxes
244
Advertisement
Table of Contents
