Napoleon LEX Series Manual page 16

16
BUILT-IN UNIT OPENING DIMENSIONS
EN
MODEL
BILEX485 29 3/4"
756mm
SIDE 12 3/4"
BURNER 324mm
WARNING!
serviced by a qualified installer to local codes.
WARNING!
cement board, ceramic tile, marble, paint etc. When adding finishing materials to the appliance.
Do not use wood or drywall.
Note: Accessory frames
overlap opening by 1 ¾"
( on all 4 sides.
4cm)
ELECTRICAL OPENING
34" (864mm)
RECOMMENDED
MINIMUM 10 SQ IN (65cm
OF VENTILATION REQUIRED ON
EACH END OF CABINET
www.napoleongrills.com
OPENING DIMENSIONS
W D H
21 3/8" 7 1/2"
543mm 191mm
16 1/2" 4 1/2"
419mm 114mm
This grill is designed for Non-combustible enclosures only, and must be installed and
Use only non-combustible materials (certified to ASTM E-136) such as steel studs,
OUTDOOR GFI ELECTRICAL OUTLET
RECOMMENDED - LOCATE ON SAME SIDE
OF GRILL AS ROTISSERIE BRACKET.
H
4"
2
)
WARNING!
CABINET FRAME, CABINET AND
COUNTER TOP MUST BE MADE FROM NON-COMBUSTIBLE
MATERIAL.
NOTES
OPENING OF AT LEAST 5 SQ (32cm
COMBUSTION AIR FOR SIDE BURNER.
BUILT-IN SIDEBURNER
H
WARNING!
not be stored below the gas grill.
2
) IN MUST BE PROVIDED FOR
A propane tank can
N415-0434 MAY 28.18