Beko 50091464CH1 User Manual page 24

4.3.12 Changing the selections after programme has started
Adding laundry after the programme has started
If the water level in the machine is suitable when you press Start/Pause button, the door lock will be
deactivated and the door will open, allowing you to add garments. The door lock icon on the display goes off
when the door lock is deactivated. After adding garments, close the door and press Start/Pause button once
again to resume the washing cycle.
If the water level in the machine is not suitable when you press Start/Pause button, the door lock
cannot be deactivated and the door lock icon on the display remains on.
C
If the temperature of the water inside the machine is above 50°C, you cannot deactivate the door lock for safety reasons,
even if the water level is suitable.
Switching the machine to pause mode:
Press the Start/Pause button to switch the machine to pause mode. Pause symbol will flash on the display.
24 / EN
•
Turn off and unplug the appliance.
•
Open the pump filter lid.
•
Remove the loading door emergency handle behind the filter cover with
a tool.
•
Open the loading door by pulling the loading door emergency handle
downwards.
•
Try to pull the handle downwards again if the loading door is not opened.
•
Bring the loading door emergency handle to its original position after
opening the loading door.
:
Washing Machine / User's Manual