Table of Contents
Advertisement
6
Enter the name by pressing number keys for each letter as shown in the
chart below. Up to 10 characters can be entered.
Example: BILL = 22 444 555
SPACE =
A =
B =
C =
D =
E =
F =
♦
To enter two letters in succession that require the same key, press
after entering the first letter.
♦
To clear a mistake, press
♦
To enter a lower case letter, continue pressing the key for the letter until the
lower case letter appears.
♦
To enter one of the following symbols, press
. / ! " # $ % & ' ( ) + + , - : ; < = > ? @ [ ¥ ] ^ _ ' { | }
7
START/MEMORY
Press
8
STOP
Press
to exit.
Note: If other cordless handsets for the UX-CD600 are in use when the above
procedure is performed, the name of the new cordless handset will not be
transmitted to those cordless handsets (the name will not appear by the
cordless handset number when
use the intercom and call transfer functions). In this event, repeat the name
entry procedure. The stored name automatically appears in the display in
Step 6, so simply press
handsets, and then exit the procedure with Step 8.
555
G =
N =
H =
O =
P =
I =
Q =
J =
R =
K =
S =
L =
T =
M =
SPEAKER
.
to store the name.
INTER
is pressed on those cordless handsets to
COM
START/MEMORY
to retransmit the name to those cordless
U =
V =
W =
X =
Y =
Z =
or
repeatedly:
) (
Machine display:
OWN NUMBER SET
The handset number and name
appear in the standby display:
HANDSET2
BILL
7
Advertisement
Table of Contents
