Table of Contents
Advertisement
Registering the Cordless Handset
After the initial charging,
the cordless handset
display shows:
HANDSET?
1
On the machine, hold down
until the display at right appears.
2
Press
on the machine.
•
Important: Be sure to complete Steps
3 through 5 below while the display at
right still appears on the machine.
3
On the cordless handset, hold down
INTER
until the display at right appears.
COM
4
Press
on the cordless handset.
1
5
Press
on the cordless handset.
START
•
The cordless handset display will go dark while registration takes place.
6
When registration is finished, the
number assigned to the cordless
handset will appear as shown at right.
Note: If you take no action for one minute during the registration procedure,
the procedure will be canceled. In this case, start from Step 1 again.
To use the cordless handset,
you must first register it in the
machine. During registration,
the machine will assign the
handset a number.
INTERCOM/
CONFERENCE
Fax machine display:
MODE SELECT
1: HS ENTRY
MODE SELECT
2: HS DELETE
HS ENTRY
Cordless handset display:
MODE SELECT
1: HS ENTRY
2: HS DELETE
HS ENTRY MODE
PRESS START KEY
Example: "2" is assigned
HANDSET 2
5
Advertisement
Table of Contents
