Sharp UX-K02 Operation Manual page 18

3
Place the cordless handset in the
charger with the dial pad facing
forward.
•
Important! The dial pad must face
forward, or the battery will not charge.
•
While charging the first time, the display
may show PLEASE REGISTER. Be
sure to let the battery charge for 10
hours, and then register the cordless
handset as explained on the following
page.
♦
The cordless handset and charger may feel warm while charging. This is
normal.
♦
The battery cannot be overcharged. When not using the cordless handset,
keep it in the charger to ensure that it is always charged.
When the battery needs charging, LOW BATTERY will appear in the display
and you will hear beeps during a phone conversation. Place the cordless
handset in the charger and let it charge.
Note: If the battery is extremely low, nothing may appear in the display during
the first several minutes that the cordless handset is in the charger. The
battery will begin to charge normally after several minutes.
Talking range (distance from fax machine) for phone calls
The talking range of the cordless handset for phone calls is approximately
1200 ft. (400 m) (line of sight; talking range may decrease depending on
transmission conditions) from the fax machine. If you hear noise or
interference while talking, move closer to the fax machine.
♦
When outside the talking range, HANDSET? will appear in the display. If
you move out of the talking range while talking on the cordless handset,
the handset will beep and you may hear interference. Move closer to the
fax machine and then press
some cases it will not be possible to restore the connection and you will
only hear a busy signal.)
Large metal objects,
metal structures, and
thick walls reduce the
talking range.
4
to restore the connection. (Note that in
TALK
Aluminum sash
Charge the battery
10
at least hours
the first time!
Metal Reinforced concrete