AP1 enters the MAC address of AP2. And AP2 enters the MAC address of AP1. Then select the same Channel
to establish the connection.
The page includes the following fields:
Object
Description
SSID
It is the wireless network name. The default SSID is "PLANET_2.4G".
Bandwidth
Select the operating channel width, "20MHz" or "40MHz".
Channel
Select the operating channel you would like to use. The channel range will be changed by
selecting a different domain.
MAC
Enter the MAC address of slave AP.
Encryption
Select the wireless encryption. The default is "Open".
Figure 5-14 Super WDS Mode – AP1
Figure 5-155 Super WDS Mode – AP2
-29-
User Manual of WNAP-C3220E