Table of Contents
Advertisement
Keypad Programming
S
E
2.1 Programming the Keypad
There are several programming options available for the LCD5501Z32-433
keypad. These are described below. Record all your programming choices in
the programming worksheets included in this manual.
Programming the LCD5501Z32-433 is similar to programming the rest of the
system. When you are in the LCD5501Z32-433 programming sections, the keypad
will display which options are turned on along the top of the display. To turn an
option on or off, press the number corresponding to the option on the number pad.
The numbers of the options that are currently turned ON will be displayed.
For example, if options 1 and 2 are on, the display will look like this:
For information on programming the rest of your security system, please refer to
your system's Installation Manual .
2.2 Function Key Options
The function keys are programmed in sections [1] to [5]. By default, the 5 function
keys on the keypad are programmed as Stay Arm (03), Away Arm (04), Chime
(06), Sensor Reset (14) and Quick Exit (16). You can change the function of each
key on every keypad. Please see your system's Installation Manual for instruc-
tions on programming the keys, and a complete list of all the function key options
available for your system.
2.3 Clock Options
The LCD5501Z32-433 will display the current time after 30 seconds of no key
presses. To set the correct time and date for the system, please refer to your
system's Instruction Manual . You can change how the keypad displays the time
with the following options. To change the clock options:
1. Enter [*][8][Installer's code]
2. Enter [000] to go to keypad programming
3. Enter section [6] to go to clock options.
4. To turn any of the options on or off, press [1], [2], or [3]:
NOTE: If the Time does not display on keypad option is selected, make sure that
the Keypad displays time when zones are open option is also selected.
[1] ON =
OFF = Time does not display on keypad
[2] ON =
OFF = Clock display is in 24-hour format (e.g. 20:00)
C
T
Time displays on keypad
Clock display is in AM/PM format
(e.g. 08:00 AM)
I
O
5
N
2
Advertisement
Table of Contents
