Technibel KPAVM93R5TAA Technical Data & Service Manual page 50

(G) Confirm and change the indoor unit address
The purpose of the above function is to let you confirm the indoor unit address after the auto. address
operation, and change the indoor unit address if it is needed.
a) Press the TEST / CHK and
AIR FLOW
UNIT
R.C.
FLAP
SET CL
b) Select the R.C. No. which you want to change with the UNIT (up) or FLAP (down) buttons.
c) Press the SET button (to confirm the R.C. No.). The smallest registered indoor No. and the selected R.C.
No. will be displayed.
AIR FLOW
UNIT
R.C.
FLAP
SET CL
d) Select the indoor No. which you want to change with UNIT button. Once in this mode, the fan motor of
selected indoor unit will turn on and let you confirm the indoor unit address.
#
¿
(
MODE
MODE
No.
0363_M_I
) buttons at the same time for more than 4 seconds.
I
Ex:
R.C. No. 3 is selected.
Indoor No. 2 is the smallest indoor No. of
the R.C. No. 3.
50