Technibel KPAVM93R5TAA Technical Data & Service Manual page 47

This picture shows the service check display.
UNIT No.
1-1
R.C.
No.
Refrigerant
Circuit No.
Alarm message
c) . A maximum of 4 alarm messages can be accessed by pressing either SET TEMP button
follows.
For example, if the last four alarm messages were, in order of occurrence from oldest to most recent, P01,
P02, P04, and most recently E01, then the display will be shown as below when you press
times. The 5th time you press
again.
R.C. No.
CHECK
SER VICE
If there are no alarm messages, the display shows:
No.
CODE No.
CHECK
SER VICE
MODE
Past
Present
Present
Past
button you can repeat the display, then the first message will be shown
R.C. No.
Alarm message
NOTE
3
R.C. No.
CHECK
SER VICE
R.C. No.
47
Pressing CL (Clear) button will clear all the
service history.
... accessed in order of "Past Present".
... accessed in order of "Present Past".
R.C. No.
CHECK
SER VICE
CHECK
SER VICE
or as
button four
4
CHECK
SER VICE