Table of Contents
Advertisement
VIVOTEK - Built with Reliability
Network
On the Network tabbed window, you can configure the network type, IP address, and the
connection ports for video streaming.
You can select DHCP as the method for cameras to acquire IP addresses, or you
can manually configure static IPs for a single or all cameras. Using static IPs is
recommended. Although the NVR can remember the MAC addresses of cameras, if
IPs are changed under the DHCP configuration, your NVR may still fail to connect the
cameras. Please consult your network administrator for details about network settings.
It is usually not necessary to change port numbers for the HTTP and RTSP ports unless
there is a conflict in your network environment.
User's Manual - 63
Advertisement
Table of Contents
