Vivotek TN9541 User Manual page 40

VIVOTEK - Built with Reliability
Below is the PTZ panel that appears with ordinary PTZ cameras.
Zoom in
1. PTZ control: Click on the arrow buttons to move towards the direction you wish to
move to.
2. Focus: Click on the Focus near and Focus far buttons to adjust camera focus.
3. Zoom: Use the Zoom in and Zoom out buttons to adjust the camera's zoom ratio.
4. Presets: If you configured preset positions, a list of preset positions will appear.
5. Speed: Adjusts the speed when moving across the field of view.
6. Patrol: If you configured preset positions into a patrolling tour, click on this button
and the camera will proceed with patrolling through the preset points.
This portal appears with a fisheye camera. The PiP and PTZ
buttons will then be disabled.
Due to the limitation of system resources, the fisheye dewarp (1R & 1P) can
only take place on one view cell, for one fisheye camera.
40 - User's Manual
List of preset positions
Speed selector
Zoom out
IMPORTANT:
Focus far
Focus near
Starts patrol