Hardware Installation - Ubiquiti UCK-G2 Quick Start Manual

Hardware Installation

1. Connect an Ethernet cable (
Port.
2. Connect the other end of the Ethernet cable to a port on a
network switch, such as a UniFi PoE Switch.
Powering the UniFi Cloud Key
Use an 802.3af-compliant switch, such as a UniFi PoE Switch, or
a USB power source (
UniFi Switch
The UniFi Cloud Key can be powered by a UniFi PoE Switch or
other 802.3af-compliant switch.
not included
UniFi Switch Power Connection Diagram
) to the Ethernet
not included
).