IEI Technology GRAND-C422-20D-H User Manual

IEI Technology GRAND-C422-20D-H User Manual

Storage server supports hardware raid, with intel xeon w cpu, up to 256 gb ddr4, 10gbe port, pcle 3.0 x16/x8/x4 slots, up to 20 sas/sata drives, 4u rack mount, 1200 w redundant psu, rohs

Advertisement

Quick Links

GRAND-C422-20D-H
GRAND-C422-20D-H Industrial serveri
MODEL:
MODEL:
GRAND-C422-20D-H
®
®
Storage Server Supports Hardware RAID, with Intel
Xeon
W CPU,
Up to 256 GB DDR4, 10GbE Port, PCIe 3.0 x16/x8/x4 Slots, Up to 20
SAS/SATA Drives, 4U Rack Mount, 1200 W Redundant PSU, RoHS
User Manual
Page i
Rev. 1.00 – November 11, 2019

Advertisement

Table of Contents
loading

Summary of Contents for IEI Technology GRAND-C422-20D-H

  • Page 1 GRAND-C422-20D-H GRAND-C422-20D-H Industrial serveri MODEL: MODEL: GRAND-C422-20D-H ® ® Storage Server Supports Hardware RAID, with Intel Xeon W CPU, Up to 256 GB DDR4, 10GbE Port, PCIe 3.0 x16/x8/x4 Slots, Up to 20 SAS/SATA Drives, 4U Rack Mount, 1200 W Redundant PSU, RoHS...
  • Page 2 GRAND-C422-20D-H Revision Date Version Changes November 11, 2019 1.00 Initial release Page ii...
  • Page 3 GRAND-C422-20D-H Copyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
  • Page 4 GRAND-C422-20D-H Manual Conventions WARNING Warnings appear where overlooked details may cause damage to the equipment or result in personal injury. Warnings should be taken seriously. CAUTION Cautionary messages should be heeded to help reduce the chance of losing data or damaging the product.
  • Page 5: Table Of Contents

    GRAND-C422-20D-H Table of Contents 1 INTRODUCTION ......................1 1.1 O ........................2 VERVIEW 1.2 M ....................3 ODEL ARIATIONS 1.3 F ........................3 EATURES 1.4 F ......................4 RONT ANEL 1.4.1 LED Indicator Specifications ................5 1.5 R ....................... 7 ANEL 1.6 S...
  • Page 6 GRAND-C422-20D-H B SAFETY PRECAUTIONS ..................36 B.1 S ..................... 37 AFETY RECAUTIONS B.1.1 General Safety Precautions ................37 B.1.2 Anti-static Precautions ..................38 B.1.3 Product Disposal ..................... 39 B.2 M ............39 AINTENANCE AND LEANING RECAUTIONS B.2.1 Maintenance and Cleaning ................39 B.2.2 Cleaning Tools ....................
  • Page 7 GRAND-C422-20D-H List of Figures Figure 1-1: GRAND-C422-20D-H Storage Server ................. 2 Figure 1-2: Dimensions (Unit: mm) ..................... 10 Figure 3-1: Release HDD Tray (2.5"/3.5") ................... 20 Figure 3-2: HDD Tray Removal (2.5"/3.5") .................. 20 Figure 3-3: HDD Tray Installation (2.5"/3.5") ................21 Figure 3-4: HDD Installation (2.5"/3.5")..................
  • Page 8 GRAND-C422-20D-H List of Tables Table 1-1: GRAND-C422-20D-H Model Variations ............... 3 Table 1-2: Specifications ....................... 9 Table 2-1: Package List ........................ 13 Table 2-2: Optional Item ....................... 13 Page viii...
  • Page 9: Introduction

    GRAND-C422-20D-H Chapter Introduction Page 1...
  • Page 10: Overview

    W processor with an integrated Intel C422 PCH, and up to 256 GB DDR4 ECC RDIMM/LRDIMM RAM, the GRAND-C422-20D-H storage server delivers outstanding performance for data transmission and applications. The GRAND-C422-20D-H supports up to twenty 2.5"/3.5" SAS 12Gb/s or SATA 6Gb/s drives, allowing for hard drives and SSDs.
  • Page 11: Model Variations

    GRAND-C422-20D-H 1.2 Model Variations The model variations of the GRAND-C422-20D-H are listed below. Model No. PCIe 3.0 Expansion Slots GRAND-C422-20D-H1A1 Two PCIe x16 slots (x16 mode) One PCIe x16 slots (x8 mode) Three PCIe x4 slots (x4 mode) GRAND-C422-20D-H2A1 Five PCIe x16 slots (x8 mode)
  • Page 12: Front Panel

    GRAND-C422-20D-H 1.4 Front Panel LCM control buttons Eight 2.5" SAS 12Gb/s or SATA 6Gb/s drive bays Power button LED Indicator: 10GbE System status Storage expansion port status Twelve 2.5"/3.5" SAS 12Gb/s or SATA 6Gb/s drive bays Page 4...
  • Page 13: Led Indicator Specifications

    GRAND-C422-20D-H 1.4.1 LED Indicator Specifications The LED indicators of the GRAND-C422-20D-H indicate the system status and information. The following table lists the front LED indicator behavior. Note that the following information is applicable only when users have properly installed the hard drive, and connected the system to the power supply.
  • Page 14 GRAND-C422-20D-H Front LED indicator locations: The following table lists the LED indicator behavior of the two LAN ports on the rear panel. Description Description Speed Green: 10G ACT/LINK Blinking: data is being 10GbE Yellow: 5G/2.5G/1G/100M sent/received Port Green: no activity...
  • Page 15: Rear Panel

    GRAND-C422-20D-H 1.5 Rear Panel 10 Gigabit Ethernet port Power supply unit 2 IPMI VGA port Four USB 3.2 Gen 1 ports Gigabit Ethernet port with NCSI Two USB 2.0 ports support Power supply unit 1 PCIe expansion slots Page 7...
  • Page 16: Specifications

    GRAND-C422-20D-H 1.6 Specifications The specifications for the GRAND-C422-20D-H are listed below. GRAND-C422-20D-H Form Factor 4U rack mount ® ® Intel Xeon W processors: ® ® Intel Xeon W-2123 processor (4-core, 3.60 GHz, 8.25M cache) ® ® Intel Xeon W-2133 processor (6-core, 3.60 GHz, 8.25M cache) ®...
  • Page 17: Table 1-2: Specifications

    GRAND-C422-20D-H 2 x RS-232 pin header Internal I/O 2 x USB 3.2 Gen 1 (5Gb/s) pin header 1 x USB DOM pin header H1A1 SKU: H2A1 SKU: Two PCIe x16 slots (x16 mode) Five PCIe x16 slots (x8 mode) PCIe 3.0 Slots...
  • Page 18: Dimensions

    GRAND-C422-20D-H 1.7 Dimensions The dimensions of the GRAND-C422-20D-H are listed below. Figure 1-2: Dimensions (Unit: mm) Page 10...
  • Page 19: Unpacking

    GRAND-C422-20D-H Chapter Unpacking Page 11...
  • Page 20: Packing List

    If any of the components listed in the checklist below are missing, do not proceed with the installation. Contact the IEI reseller or vendor the GRAND-C422-20D-H was purchased from or contact an IEI sales representative directly by sending an email to sales@ieiworld.com.
  • Page 21: Optional Item

    GRAND-C422-20D-H Screw pack for 3.5" HDD installation Table 2-1: Package List 2.2 Optional Item The following are optional component(s) which may be separately purchased: Microsemi Adaptec SmartRAID 3154-24i RAID adapter (P/N: 7F200-SMARTRAID315424I-RS) Table 2-2: Optional Item Page 13...
  • Page 22: Installation

    GRAND-C422-20D-H Chapter Installation Page 14...
  • Page 23: Anti-Static Precautions

    Electrostatic discharge (ESD) can cause serious damage to electronic components, including the motherboard and the power module. (Dry climates are especially susceptible to ESD.) It is therefore critical that whenever the GRAND-C422-20D-H is opened and any electrical component handled, the following anti-static precautions are strictly adhered to.
  • Page 24: Expansion Card Installation

    Strictly adhere to the instructions to install an expansion card on the system. Failure to do so could result in injury to human body or death. The GRAND-C422-20D-H provides multiple PCIe 3.0 slots so that users can add functionality to their system.
  • Page 25 GRAND-C422-20D-H Step 3: Loosen the two captive screws on the rear of the GRAND-C422-20D-H. Slide the top cover towards rear panel. Grab the handle to lift the top cover off the system. Step 4: Remove the screw(s) from the expansion slot cover(s) and detach cover(s).
  • Page 26: Hard Drive Installation

    Step 7: Reconnect all cables back into the GRAND-C422-20D-H. 3.4 Hard Drive Installation The GRAND-C422-20D-H is compatible with 2.5-inch/3.5-inch SAS/SATA hard drives. NOTE: Before installing hard drives, ensure the disk drives (HDDs/SSDs) that you use are compatible with the GRAND-C422-20D-H.
  • Page 27: Hard Drive Bay Numbering

    GRAND-C422-20D-H WARNING: Users are strongly recommended to turn OFF the GRAND-C422-20D-H before replacing the hard drive to reduce the risk of electric shock. CAUTION: IEI disclaims any responsibility for product damage/malfunction or data loss/recovery due to misuse or improper installation of hard disks in any occasions for any reasons.
  • Page 28: Hard Drive Installation - 2.5"/3.5" Bays

    GRAND-C422-20D-H 3.4.2 Hard Drive Installation - 2.5"/3.5" Bays The front panel of the GRAND-C422-20D-H has 12 drive slots for installing 2.5"/3.5" SAS/SATA HDD/SSD. To install the hard drive into the system, please follow the steps below. Step 1: Press the button to release the HDD tray as shown in Figure 3-1.
  • Page 29: Figure 3-3: Hdd Tray Installation (2.5"/3.5")

    (Figure 3-3). Figure 3-3: HDD Tray Installation (2.5"/3.5") Step 4: Insert the drive tray into the GRAND-C422-20D-H all the way to the end. Close and lock the latch to secure the drive tray. See Figure 3-4. Figure 3-4: HDD Installation (2.5"/3.5")
  • Page 30: Hard Drive Installation - 2.5" Bays

    GRAND-C422-20D-H 3.4.3 Hard Drive Installation - 2.5" Bays The front panel of the GRAND-C422-20D-H also has 8 drive slots for installing 2.5" SAS/SATA SSD. To install the hard drive into the system, please follow the steps below. Step 1: Press the button to release the HDD tray as shown in Figure 3-5.
  • Page 31: Figure 3-7: Drive Tray Installation (2.5")

    (Figure 3-7). Figure 3-7: Drive Tray Installation (2.5") Step 4: Insert the drive tray into the GRAND-C422-20D-H all the way to the end. Close the latch to secure the drive tray. See Figure 3-8. Figure 3-8: HDD Installation (2.5")
  • Page 32: Power-On Procedure

    Incorrect voltages applied to the system may cause damage to the internal electronic components and may also cause injury to the user. To power on the GRAND-C422-20D-H, please make sure of the following: The HDD/SSD is installed ...
  • Page 33: Figure 3-10: Power Button

    GRAND-C422-20D-H Step 2: Push the power button (Figure 3-10). Figure 3-10: Power Button Step 3: To turn off the GRAND-C422-20D-H, press the power button for 1.5 seconds. To force turn off, press the power button for 5 seconds. Page 25...
  • Page 34: Maintenance

    GRAND-C422-20D-H Chapter Maintenance Page 26...
  • Page 35: Component Replacement Procedure

    GRAND-C422-20D-H storage server other than those listed below. If any other components fail or need replacement, contact the IEI reseller or vendor you purchased the GRAND-C422-20D-H from or contact an IEI sales representative directly. To contact an IEI sales representative, please send an email to sales@ieiworld.com.
  • Page 36: Memory Module Replacement

    Put on an antistatic wrist strap to prevent electrostatic discharge. The crocodile clip should be connected to the ground. Step 3: Loosen the two captive screws on the rear of the GRAND-C422-20D-H. Slide the top cover towards rear panel. Grab the handle to lift the top cover off the system.
  • Page 37 RAM in. Step 8: Re-install the top cover. Step 9: Reconnect all cables back into the GRAND-C422-20D-H. CAUTION: For four-channel configuration, always install four identical memory modules that feature the same capacity, timings, voltage, number of ranks and the same brand.
  • Page 38: Power Supply Unit Replacement

    To replace a failed power supply unit, please follow the steps below. Step 1: Turn off the GRAND-C422-20D-H. Disconnect the power adaptor, network cable(s), and any other connectors or cables from the GRAND-C422-20D-H. Step 2: Firmly press and hold the green button on back of PSU towards the black handle.
  • Page 39: A Regulatory Compliance

    GRAND-C422-20D-H Appendix Regulatory Compliance Page 31...
  • Page 40 GRAND-C422-20D-H DECLARATION OF CONFORMITY This equipment is in conformity with the following EU directives: EMC Directive 2014/30/EU  Low-Voltage Directive 2014/35/EU  RoHS II Directive 2015/863/EU  If the user modifies and/or install other devices in the equipment, the CE conformity declaration may no longer apply.
  • Page 41 GRAND-C422-20D-H Español [Spanish] IEI Integration Corp declara que el equipo cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. Ελληνική [Greek] IEI Integration Corp ΔΗΛΩΝΕΙ ΟΤΙ ΕΞΟΠΛΙΣΜΟΣ ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ...
  • Page 42 GRAND-C422-20D-H Româna [Romanian] IEI Integration Corp declară că acest echipament este in conformitate cu cerinţele esenţiale şi cu celelalte prevederi relevante ale Directivei 1999/5/CE. Slovensko [Slovenian] IEI Integration Corp izjavlja, da je ta opreme v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive 1999/5/ES.
  • Page 43 GRAND-C422-20D-H FCC WARNING This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and  This device must accept any interference received, including interference ...
  • Page 44: B Safety Precautions

    GRAND-C422-20D-H Appendix Safety Precautions Page 36...
  • Page 45: Safety Precautions

    Do not apply voltage levels that exceed the specified voltage range.  Doing so may cause fire and/or an electrical shock. Electric shocks can occur if the GRAND-C422-20D-H chassis is opened  when the GRAND-C422-20D-H is running. If considerable amounts of dust, water, or fluids enter the ...
  • Page 46: Anti-Static Precautions

    GRAND-C422-20D-H and severe injury to the user. Electrostatic discharge (ESD) can cause serious damage to electronic components, including the GRAND-C422-20D-H. Dry climates are especially susceptible to ESD. It is therefore critical that whenever the GRAND-C422-20D-H is opened and any of the electrical components are handled, the following anti-static precautions are strictly adhered to.
  • Page 47: Product Disposal

    Please follow the national guidelines for electrical and electronic product disposal. B.2 Maintenance and Cleaning Precautions When maintaining or cleaning the GRAND-C422-20D-H, please follow the guidelines below. B.2.1 Maintenance and Cleaning Prior to cleaning any part or component of the GRAND-C422-20D-H, please read the details below. Page 39...
  • Page 48: Cleaning Tools

    GRAND-C422-20D-H. B.2.2 Cleaning Tools Some components in the GRAND-C422-20D-H may only be cleaned using a product specifically designed for the purpose. In such case, the product will be explicitly mentioned in the cleaning tips. Below is a list of items to use when cleaning the GRAND-C422-20D-H.
  • Page 49: C Hazardous Substances Disclosure

    GRAND-C422-20D-H Appendix Hazardous Substances Disclosure Page 41...
  • Page 50: Rohs Ii Directive (2015/863/Eu)

    GRAND-C422-20D-H C.1 RoHS II Directive (2015/863/EU) The details provided in this appendix are to ensure that the product is compliant with the RoHS II Directive (2015/863/EU). The table below acknowledges the presences of small quantities of certain substances in the product, and is applicable to RoHS II Directive (2015/863/EU).
  • Page 51: China Rohs

    GRAND-C422-20D-H C.2 China RoHS 此附件旨在确保本产品符合中国 RoHS 标准。以下表格标示此产品中某有毒物质的含量符 合中国 RoHS 标准规定的限量要求。 本产品上会附有”环境友好使用期限”的标签,此期限是估算这些物质”不会有泄漏或突变”的 年限。本产品可能包含有较短的环境友好使用期限的可替换元件,像是电池或灯管,这些 元件将会单独标示出来。 部件名称 有毒有害物质或元素 壳体 显示 印刷电路板 金属螺帽 电缆组装 风扇组装 电力供应组装 电池 O: 表示该有毒有害物质在该部件所有物质材料中的含量均在 SJ/T 11363-2006 (现由 GB/T 26572-2011 取 代) 标准规定的限量要求以下。 X: 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T 11363-2006 (现由 GB/T 26572-2011 取代) 标准规定的限量要求。...

This manual is also suitable for:

Grand-c422-20d-h1a1Grand-c422-20d-h2a1

Table of Contents