Table of Contents
Advertisement
Quick Links
TRADEMARKS
VioGate TM and IEI® are trademarks of ICP Electronics Inc.
®
®
Microsoft
, Windows
brand or product names are trademarks of their respective companies or organizations.
LIMITED WARRANTY
In no event shall IEI's liability exceed the price paid for the product from direct, indirect, special,
incidental, or consequential software, or its documentation. IEI offers no refunds for its products. IEI
makes no warranty or representation, expressed, implied, or statutory, with respect to its products or the
contents or use of this documentation and all accompanying software, and specifically disclaims its
quality, performance, merchantability, or fitness for any particular purpose. IEI reserves the right to
revise or update its products, software, or documentation without obligation to notify any individual or
entity.
FCC STATEMENT
The IEI VioGate has been tested and found to comply with the limits
pursuant to Part 15 of the FCC
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used according to the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which is found by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment or device
Connect the equipment to an outlet other than the receiver's
Consult a dealer or an experienced radio/TV technician for assistance
IMPORTANT NOTE
Read Instructions
Before the unit is operated, please read all the safety and operating instructions.
Power Sources
Only operate this unit with the type of the power source specified by the manufacturer.
Servicing
Please contact qualified technicians for any service requests. Do not attempt to service the unit yourself,
as opening the cover may expose you to dangerous voltage and other hazards.
Warning
To prevent fire or shock, do not expose this equipment to rain or moisture.
Do not place heavy items on the unit.
®
and Internet Explorer
Rules. These limits are designed to provide reasonable protection
are registered trademarks of Microsoft Inc. All other
1
for a Class B digital device,
Advertisement
Table of Contents
Related Manuals for IEI Technology VioGate
Summary of Contents for IEI Technology VioGate
- Page 1 FCC STATEMENT The IEI VioGate has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
- Page 2 Main Features - Surveillance over IP. (Plug and Play) - Can operate in standalone mode, or with a VioGate Master to create a complete network surveillance system. - Superior image quality (30 fps max for one camera)
-
Page 3: System Overview
The VioGate box contains: VioGate IP Surveillance Server User’s Manual Power Cord One CAT-5 Ethernet Cable Quick Install Wizard (CD-ROM or Floppy Diskette) System Overview VioGate 100 Front View Configuration Reset Switch Configuration Reset Switch Configuration Reset Switch Configuration Reset Switch... - Page 4 Note: Before you modify any of the network settings, please press down on the configuration reset switch. (Use a sharp object to press down on the configuration reset switch located in the front of the VioGate server for 5 seconds. You will hear 5 beeps when the reset has been completed)
- Page 5 4. Please click on the “Refresh” button located at the bottom of the window. 5. If there are several VioGate servers in your LAN, please choose the correct device and double-click on the device entry. 6. If you can connect to the VioGate server successfully, the webpage will automatically prompt you for the user name and the password.
- Page 6 6. Enter the TCP/IP networking setting.
- Page 7 6. Click on “OK” and restart the VioGate server. 7. Start the web-browser and enter the VioGate’s IP address in the location field. Notice: If you wish to connect to the VioGate server remotely via Internet, your VioGate server needs to have a public IP.
- Page 8 5.5 is recommended) to use the monitoring function. Enter the Monitoring Page Users can use the following 2 ways to connect to your VioGate server’s monitoring page. Start the web browser, if you know the IP address of the VioGate server, please enter the IP address in the web browser’s location field, and press...
- Page 9 After the user has successfully logged in to the server, he should see the following monitoring page. (If the monitoring page fails to display correctly, you can attempt to refresh the page after shutting down your anti-virus software) Options Display Mode You can select the desired display mode for the monitoring page, please use the function keys located on the left of the monitoring page to select the desired display mode.
-
Page 10: Video Playback
Picture in Picture Mode Quad Mode Sequential Mode Recording Videos Press the button to record the selected camera’s live video to the local personal computer. Press the button again to stop the recording. Take Snapshots Press the button to save a snapshot image file to the local personal computer. Other Messages When the server cannot display live video for a particular camera, the corresponding video window will display an error message, possible messages are listed below：... - Page 11 Please press the button in the monitoring page or the administration page to enter the video playback page. Select Video Files You can use the following ways to select the video files to playback: Select files stored on the remote storage device according the time.
- Page 12 Play Video Files While you are using the video playback function to playback the video files, you can use the following controls: Play Stop Frame by Frame Select playback rate...
-
Page 13: Accessing The Administration Page
Configuring VioGate Once you have installed the VioGate and other hardware, and connected it to the network, you can use your browser (only supports Microsoft Internet Explorer 5.0 or later; Microsoft Internet Explorer 5.5 is recommended) to complete administrative tasks for the VioGate. -
Page 14: Server Administration
After you’ve successfully logged in to the server, please click on the located on the left hand side of the administration page to enter the quick-configuration page. Server Administration The Server Administration comprises the following eleven sections:... - Page 15 Server Administration Administration Quick Configuration System Settings Server Name Software Version Date & Time Network Settings Using DHCP Using Fixed IP Using PPPoE Enable DynDNS Service Specify DNS Server Enable Multicast IP Security Allow All Connection Allow Connections Only from the Following List Deny Connections from the Following List User Management Users...
-
Page 16: Quick Configuration
You can also verify the current software version in this page. Server Name You have to choose a unique system name for your VioGate server so that it can be identified quickly on the network. System name can contain up to 20 characters, consisting of the usual Alpha-numeric characters, dash (-) and Chinese characters. -
Page 17: Network Settings
Network Settings Select the method the VioGate server uses to connect o the network, and decides whether to enable the multicast function. You need to understand the configuration of your network to enter the correct setting. If you are uncertain about how your server connects to the external network or have question on any of the TCP/IP setting in general, please contact your network administrator for further assistance. - Page 18 IP address information through DHCP service. Enable Dynamic DNS service If you wish to let users on the internet to use a domain name to connect to the VioGate server, you can activate the dynamic domain name service. Please apply for an account and register for a dynamic domain name at a dynamic domain name service provider.
-
Page 19: User Management
Deny connections from the following list The server will only deny connections made by computers within the list The factory setting of the VioGate server is to “Accept All Connections” User Management Your VioGate server can provide services to any authorized user. To effectively manager different user’s privileges, you have to register and configure user accounts... -
Page 20: Camera Settings
The password can contain up to 16 case-sensitive characters. For security reason, you should choose a password with at least 6 characters long that is not easy to be guessed. You can perform the following user account administration tasks: Create a new user Change password for a user Change an account name Change user privileges... - Page 21 before you can use the video play-back function. Recording mode Continuous Recording The system will continuously record the video feed to the storage, but other setting might cause the server to stop recording Scheduled Recording The system will start the recording function according to the day, staring time and the ending time that you’ve specified.
-
Page 22: Snapshot Settings
Snapshot Settings Snapshot mode Snapshot Interval You can setup the interval between the snapshots Continuous Snapshot The systems will continuously takings snapshots, but other setting might cause the server to stop recording Scheduled Snapshot The system will start taking snapshots according to the day, starting time and the ending time that you’ve specified. -
Page 23: Event Handling
Event Type When an event happens, the system will automatically trigger corresponding alarms, react to unusual conditions, to ensure that the VioGate server can correctly capture, record, and play back video files. Each event can be individually associated with various alarms... -
Page 24: System Tools
Restart/Shutdown Choose “Restart” to restart or shutdown the VioGate server. If you choose to shutdown the system, please turn off the power switch located on the back of the VioGate server. - Page 25 VioGate Viewer If you choose to record image files using the VioGate server, the server will automatically save video files (with .ivg as the extension) to the specified storage device. The video files will have following filename format: yyyy-mm-dd hh-mm-ss.ivg. You can connect to the server and copy the video files to your personal computer and launch the VioGate Viewer to view the file content.
- Page 26 Use the function buttons located on the bottom left of the window to play, pause, stop, and skip the video files. Select the numbers located on the left hand side of the window to adjust the playback speed. Click on the right hand side button to change the window size.
-
Page 27: Maintenance
Maintenance VioGate has been specially designed to run on 24 hours, 7 days a week and to be ready at all times. It is also robust to protect against system crashes caused by power loss. This section provides a general maintenance overview. - Page 28 VioGate. Go to the system Administration and restore the configurations in the System Tools – Backup/Restore page.
-
Page 29: Appendix A Terms And Glossary
Appendix A Terms and Glossary TCP/IP (Transmission Control Protocol/Internet Protocol) TCP/IP was originally developed by the Defense Department of the US to allow dissimilar computers to talk. Today, as many of us know, this protocol is used as the basis for the Internet. Because it must span such large distances and cross multiple, smaller networks, TCP/IP is a routable protocol,, meaning it can send data through a router on its way to its destination. - Page 30 over the ATM link via encapsulated Ethernet-bridged frames. The session can e terminated at either a local exchange carrier central office or an internet service provider (ISP) point of presence. (Domain Name System) Domain Name System identifies each computer as a network node on the Internet using an internet protocol address system to translate from domain name to IP numbers and vice-versa.
-
Page 31: Appendix B Registering A Dynamic Domain Name
Registering a Dynamic Domain Name Introduction Your VioGate supports the DDNS service provided by DynDNS. You can go to the web site of DynDNS (http://www.dyndns.org/) and register for a dynamic domain name. Configure and activate the DDNS service, then the Internet users will be able to access your VioGate via this dynamic domain name. - Page 32 b. Click on “Agree” if you accept the service agreement. c. Enter the username, email address and password to create a DDNS service account. You will need to enter the same username and password in the Network Settings．DDNS Service page of the Disk On-line Server system administration. Please verify your email address to receive the confirmation message from the server.
- Page 33 d. If below web page appears on the screen, your account has been successfully created and a confirmation message has been sent to your -mail address. Please follow the instructions in the e-mail to activate your account within 48 hours. e.
Need help?
Do you have a question about the VioGate and is the answer not in the manual?
Questions and answers